PRINT SCOPE


National Association of Testing Authorities, Australia

SCOPE OF ACCREDITATION



Aitken Rowe Testing Laboratories Pty Ltd
ARTL ALBURY
| Accreditation Number: 4679 | Site Number: 23954 |

Address Details:
1/60 Boronia Street
NORTH ALBURY, NSW 2640
AUSTRALIA
Website: www.aitkenrowe.com.au
Contact Details:
Mr Josh Galinovic
+61(02) 60401661


Availability:Services available to external clients



Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

 

ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity

SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION/RANGE
Evaluation of geotechnical and civil construction material - Aggregate propertiesAggregatesShapeRatio greatest to least dimensionRMS (NSW) Method T278

Bulk densityUncompactedAS 1141.4, RMS (NSW) Method T211

ShapeCrushed facesRMS (NSW) Method T239

Aggregate crushing valueNot applicableAS 1141.21

Wet/dry strength variationNot applicableAS 1141.22,  RMS (NSW) Method T215

ShapeAverage least dimensionAS 1141.20.1, AS 1141.20.2, AS 1141.20.3, RMS (NSW) Method T235, RMS (NSW) Method T275

ShapeProportional calliperAS 1141.14, RMS (NSW) Method T213

Bulk densityCompactedAS 1141.4, RMS (NSW) Method T212

Particle size distributionSieve analysis of material finer than 75 µmAS 1141.12, RMS (NSW) Method T203

Particle size distributionSieve analysisAS 1141.11.1, RMS (NSW) Method T201

Particle size distributionFine particles in road materialsAS 1141.19, RMS (NSW) Method T107

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar consistence in-situConcrete, grout and mortarSlump flowConeAS 1012.3.1, RMS (NSW) Method T301

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar propertiesConcrete, grout and mortarMass per unit volume - Hardened concreteWater displacementAS 1012.12.2, RMS (NSW) Method T317

Mass per unit volume - Hardened concreteDimensionsAS 1012.12.1, RMS (NSW) Method T316

Specimen preparationCapping of compressive strength specimensRMS (NSW) Method T305
Air content of freshly mixed concreteReduced air pressureAS 1012.4.2, RMS (NSW) Method T320

Compressive strengthCylinderAS 1012.9, RMS (NSW) Method T306

Mass per unit volume - Fresh concreteIn-situ measurement using fixed volume measureAS 1012 5, RMS (NSW) Method T303

Compressive strengthCoreAS 1012.14, RMS (NSW) Method T310

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar specimen manufacture and curingConcrete, grout and mortarSpecimen manufacture and curingIn-situ manufacture and curing of drying shrinkage specimens; Moist curing drying shrinkage specimens in the laboratory; AS 1012.8.4

Specimen conditioningWet conditioning of hardened concrete core specimensAS 1012.14

Specimen manufacture and curingCuring flexural strength specimens in the laboratory; In-situ manufacture and curing of flexural strength specimens; AS 1012.8.2, RMS (NSW) Method T327

Specimen manufacture and curingManufacture and curing of cylindrical specimens in the laboratoryAS 1012.8.1, RMS (NSW) Method T304

Evaluation of geotechnical and civil construction material - Soil classificationSoilsPlastic limitNot applicableAS 1289.3.2.1, RMS (NSW) Method T109

Fine particles in road materialsRMS (NSW) Method T107

Liquid limitCasagrande four pointAS 1289.3.1.1, RMS (NSW) Method T108

Liquid limitCasagrande one pointAS 1289.3.1.2

Moisture contentHot plateRMS (NSW) Method T121

Sieve analysisNot applicableAS 1289.3.6.1, RMS (NSW) Method T106

Linear shrinkageNot applicableAS 1289.3.4.1, RMS (NSW) Method T113

Moisture contentMicrowave ovenRMS (NSW) T180
Plasticity indexCasagrandeAS 1289.3.3.1, RMS (NSW) Method T109

Moisture contentDrying ovenAS1289.2.1.1, RMS (NSW) T120
Evaluation of geotechnical and civil construction material - Soil compaction characteristicsSoilsMaximum dry densityRMS (NSW) Method T164
Dry density/moisture content relationshipStandard compactive effortAS 1289.5.1.1, RMS (NSW) Method T111, RMS (NSW) Method T130

Dry density/moisture content relationshipModified compactive effortAS 1289..2.1, RMS (NSW) Method T112

Dry density/moisture content relationshipThree compaction pointRMS (NSW) Method T162

Evaluation of geotechnical and civil construction material - Soil engineering propertiesSoilsBearing ratioRemoulded specimensAS 1289.6.1.1, RMS (NSW) Method T117, RMS (NSW) Method T132

DispersionEmerson classAS 1289.3.8.1

Penetration in-situDynamic coneAS 1289.6.3.2, RMS (NSW) Method T161

Evaluation of geotechnical and civil construction material - Soil field densitySoilsField moisture contentNuclear gaugeAS 1289.5.8.1, RMS (NSW) Method T173

Compaction controlHilfAS 1289.5.7.1

Dry density ratioCalculationAS 1289.5.4.1
Relative compactionRMS (NSW) Method T166

Evaluation of geotechnical and civil construction material - Soil pre-treatmentSoilsSoil pre-treatmentAccelerated weathering pre-treatment; Repeated compaction pre-treatment; RMS (NSW) Method T102, RMS (NSW) Method T103

Soil pre-treatmentNot applicableAS 1289.1.1, RMS (NSW) Method T105

Evaluation of geotechnical and civil construction material - Soil stabilisationSoilsCompressive strengthUniaxial unconfinedRMS (NSW) Method T116, RMS (NSW) Method T131

Sample collectionConcrete, grout and mortarNot applicableFresh concrete from a mixer; Fresh concrete from deposited concrete; AS 1012.1,  RMS (NSW) Method T300

Not applicableFresh concrete from a mixer; Fresh concrete from deposited concrete; AS 1012.1

AggregatesNot applicableAggregate from a conveyor belt; Aggregate from a stockpile; Aggregate from a truck; AS 1141.3.1

SoilsNot applicableUndisturbed soil sampling by open-drive samplerAS 1289.1.3.1, RMS (NSW) Method T100

Not applicableDisturbed sampling from earthwork; Disturbed soil sampling from a pavement; Disturbed soil sampling from a stockpile; AS 1289.1.2.1, RMS (NSW) Method T100

| Accreditation Number: 4679 | Site Number: 23954 | Printed on : 27-Sep-2020

 

--------------------- END OF SCOPE ----------------------