PRINT SCOPE


National Association of Testing Authorities, Australia

SCOPE OF ACCREDITATION



Hallett Laboratory
HALLETT LABORATORY
| Accreditation Number: 19646 | Site Number: 22770 |

Address Details:
126 Churchill Road North
DRY CREEK, SA 5094
AUSTRALIA
Website: hallettlaboratory.com.au
Contact Details:
Dr Campbell Coghlan
+61 0418441984


Availability:Services conditionally available to external clients



Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

 

ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity

SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION/RANGE
Evaluation of geotechnical and civil construction material - Aggregate contaminantsAggregatesClay and fine siltSettlingAS 1141.33

Weak particles contaminantsSieve analysisAS 1141.32

Coarse aggregate qualityVisual comparisonAS 1141.30.1

Organic impuritiesColour testAS 1141.34

Evaluation of geotechnical and civil construction material - Aggregate propertiesAggregatesParticle density of coarse aggregate; Particle density of fine aggregate; Water absorption of coarse aggregate; Water absorption of fine aggregate; Weighing-in-waterAS 1141.5
AS 1141.6.1

Particle size distributionSieve analysis; Sieve analysis of material finer than 75 μm; AS 1141.11.1
AS 1141.12

Abrasion resistanceLos Angeles machine valueAS 1141.23

Wet/dry strength variationNot applicableAS 1141.22

SoundnessExposure to sodium sulfate solutionAS 1141.24
Bulk densityCompacted; Uncompacted; AS 1141.4

ShapeAngularity; Average least dimension; Elongation; Flakiness; Flat particles; Proportional calliper; AS 1141.14
AS 1141.15
AS 1141.16
AS 1141.20.1
AS 1141.20.2
AS 1141.20.3
DPTI(SA) MAT-TP 240
DPTI(SA) MAT-TP  241
DPTI(SA) MAT-TP 244


Aggregate crushing valueNot applicableAS 1141.21

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar consistence in-situConcrete, grout and mortarSlump flowCone; J-ring; T500; AS 1012.3.1
AS 1012.3.5

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar propertiesConcrete, grout and mortarBleedingIn-situ analysis (freshly mixed concrete)AS 1012.6
Flexural tensile strengthLimit of proportionality; Residual; EN 14651
ASTM C1609

Setting time - In-situ; Setting time - Laboratory; Not applicableAS 1012.18
Drying shrinkage specimen measurementNot applicableAS 1012.13
Mass per unit volume - Hardened concreteDimensionsAS 1012.12.1

Modulus of elasticityPoisson's ratio; Static chord modulus; AS 1012.17
Compressive strengthCore; Cube; Cylinder; AS 1012.9
AS 1012.14

PermeabilityVolume change with water absorption (permeable voids)AS 1012.21
Flexural strengthModulus of ruptureAS 1012.11
Mass per unit volume - Fresh concreteAS 1012.5

Mass per unit volume - Hardened concreteWater displacementAS 1012.12.2
Air content of freshly mixed concreteIncreased air pressureAS 1012.4.1
Chloride level in hardened concrete; Sulfate level in hardened concrete; Nitric acid; Water soluble; AS 1012.20.1 (except clause 6.2)
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar specimen manufacture and curingConcrete, grout and mortarSpecimen conditioningWet conditioning of hardened concrete core specimensAS 1012.14
Specimen manufacture and curingCuring cylinder specimens in the laboratory; In-situ manufacture and curing of cylindrical specimens; In-situ manufacture and curing of drying shrinkage specimens; In-situ manufacture and curing of flexural strength specimens; In-situ manufacture and curing of grout and mortar cubes; Manufacture and curing of cylindrical specimens in the laboratory; Manufacture and curing of drying shrinkage specimens in the laboratory; Manufacture and curing of flexural strength specimens in the laboratory; Manufacture and curing of grout and mortar cubes in the laboratory; AS 1012.8.1
AS 1012.8.2
AS 1012.8.3
AS 1012.8.4

Evaluation of geotechnical and civil construction material - Soil classificationSoilsLiquid limit; Plasticity index; Plastic limit; Casagrande four point; Casagrande one point; AS 1289.3.1.1
AS 1289.3.1.2
AS 1289.3.2.1
AS 1289.3.3.1

Sieve analysisNot applicableAS 1289.3.6.1
DPTI(SA) MAT-TP 134

Moisture contentDrying ovenAS 1289.2.1.1

Linear shrinkageNot applicableAS 1289.3.4.1

Evaluation of geotechnical and civil construction material - Soil compaction characteristicsSoilsAssignment of OMC/MDDNot applicableAS 1289.5.4.2
DPTI(SA) MAT-TP 166

Dry density/moisture content relationshipModified compactive effort; Standard compactive effort; AS 1289.5.1.1
AS 1289.5.2.1

Evaluation of geotechnical and civil construction material - Soil pre-treatmentSoilsSoil pre-treatmentNot applicableAS 1289.1.1

Sample collectionConcrete, grout and mortarNot applicableFresh concrete from a mixerAS 1012.1

AggregatesNot applicableQuarry aggregate from a rock spallAS 1141.3.2

Aggregates; Soils; Not applicableAggregate from a stockpile; Disturbed soil sampling from a stockpile; AS 1141.3.1
DPTI(SA) MAT-TP 226


ISO/IEC 17025 (2017)
Materials

SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION/RANGE
Analysis of cements and cementitious materials - CompositionPozzolanic materialsChlorideClassical (dry ingredients); Classical (hydrated material); AS 3583.13
Insoluble residueClassical (dry ingredients)AS 3583.14
AS 2350.2

Sulfur trioxide (sulfuric anhydride)Classical (dry ingredients); Classical (hydrated material); AS 3583.8
Loss on ignitionGravimetricAS 3583.3
Cement productsLoss on ignitionGravimetricAS 2350.2
Aluminium oxide; Calcium oxide; Ferric oxide; Magnesium oxide; Potassium oxide; Silicon dioxide; Sodium oxide; Sulfur trioxide (sulfuric anhydride); X-ray fluorescence (XRF) - Dry ingredients; X-ray fluorescence (XRF) - Hydrated material; AS 2350.2
In-house method Hallett Laboratory XRF Test Method

Analysis of cements and cementitious materials - PropertiesPozzolanic materialsFinenessNot applicableAS 3583.1
Relative density (specific gravity)DisplacementAS 3583.5
ASTM C188

Relative strength and water requirementNot applicableAS 3583.6
Free moistureConvection ovenAS 3583.2
Cement productsConsistencyNormal consistencyAS 2350.3
Fineness indexAir permeabilityAS 2350.8
Particle sizeWet sievingAS 2350.9
Sample preparation of portland and blended cementNot applicableAS 2350.12
Setting timeNot applicableAS 2350.4
Length changeLength change with exposure to sulfate solutionAS 2350.14
Soundness of portland and blended cementCement pat; Le Chatelier; AS 2350.5
Consistency of masonry mortarSlumpAS 2701.5
Drying shrinkageNot applicableAS 2350.13
Compressive strengthNot applicableAS 2350.11
Sample collectionCement productsNot applicablePortland, blended and masonry cements from bags, bins, transport containersAS 2350.1
| Accreditation Number: 19646 | Site Number: 22770 | Printed on : 26-Aug-2019

 

--------------------- END OF SCOPE ----------------------