PRINT SCOPE


National Association of Testing Authorities, Australia

SCOPE OF ACCREDITATION



Fuel Calibration Services Pty Ltd
FUEL CALIBRATION SERVICES PTY LTD
| Accreditation Number: 19101 | Site Number: 21542 |

Address Details:
26 McKinnon Road
PINELANDS, NT 829
AUSTRALIA
Website: www.fcsnt.com.au
Contact Details:
Mr James Ritchie
+61(08) 89474700


Availability:Services available to external clients



Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

 

ISO/IEC 17025 (2017)
Calibration

SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION/RANGE
Flow metrology - Flow measuring devices and systemsLiquid metersVolume (and nominal flow rate)Comparison with a reference meter; To be determined; including stating compliance with the specifications in the National Measurement Institute Test Procedure NITP 5.1 & 5.2

including on site calibrations



CAPABILITY
Including on site calibrations
flow meters for liquid hydrocarbons other than LPG
with Calibration and Measurement Capability of-
0.1% of volume with a minimum 20 L test volume by the volumetric method using a reference volume measure
0.1% of volume with a minimum 200 L test volume by the volumetric method using a master meter
at flow rates in the range 6 L/min to 3800 L/min
Pressure metrology - Pressure and vacuum measuring equipmentDigital pressure gauges; Mechanical pressure gauges; Pressure recorders; Vacuum gauges; Gauge pressureBy pressure calibratorMSA Test Method 1 for digital gauges ;
MSA Method 2 for mechanical gauges 

CAPABILITY
with Calibration and Measurement Capability of-
0.06% of reading or 0.2 kPa (whichever is greater) from -95 kPa to 2000 kPa (pneumatic measurement)
0.06% of reading or 0.5 kPa (whichever is greater) from 100 kPa to 280 MPa (hydraulic measurement)
0.06% of reading or 0.5 kPa (whichever is greater) from 100 kPa to 60 MPa (oil-free hydraulic measurement)
Torque - Torque measuring and testing equipmentTorque wrenchesTorqueComparison with a reference standardincluding compliance with BS EN ISO 6789

CAPABILITY
with Calibration and Measurement Capability of-
1.0 % of reading from 0.5 Nm to 1500 Nm

ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity

SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION/RANGE
Evaluation of mechanical performance of pressure plant, pipelines and equipmentHose and hose assemblies; Piping; Pressure fittings; Valves; Conductivity; Hydrostatic pressure; Not applicableAS 1180.5 Sections 7.1, 7.2,
AS 1180.13A:1987 kinds 1 and 2 only,
AS 1180.13B:1987 kinds 1 and 2 only, 
AS 1271 Section 2.6 and 3.6 (except lift and discharge capacity),
AS 2117 Sections 2.1, 2.2, 2.6.1, 2.6.2,
AS 2683 Sections 2.1, 2.5,
AS 2792 Section 3.1.2 and Appendix E up to 105 MPa,
AS 4037 Sections 17, 19,
AS 4041 Sections 6.6, 6.7
up to 280 MPa

| Accreditation Number: 19101 | Site Number: 21542 | Printed on : 31-Oct-2020

 

--------------------- END OF SCOPE ----------------------