PRINT SCOPE


National Association of Testing Authorities, Australia

SCOPE OF ACCREDITATION



Australian National Testing Laboratories Pty Ltd
AUSTRALIAN NATIONAL TESTING LABORATORIES PTY LTD
| Accreditation Number: 15698 | Site Number: 16850 |

Address Details:
Unit 17, 15 Suscatand Street
ROCKLEA, QLD 4106
AUSTRALIA
Website: www.antl.com.au
Contact Details:
Mr Jeffrey Profke
+61(07) 32740737


Availability:Services available to external clients



Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

 

ISO/IEC 17025 (2005)
Infrastructure and Asset Integrity

SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION/RANGE
Evaluation of mechanical performance of pressure plant, pipelines and equipmentHose and hose assemblies; Waste disposal fittings; Abrasion resistance; Ageing; Burst pressure; Dimensional stability; Dispersal rate of a hose reel discharge; Distortion; Ease of opening a nozzle, other than a twist nozzle, to the open position; Ease of turning a twist nozzle to the open position; Expansion; Flexibility; Flow rate of a hose reel; Hose reel assembly pressure; Hydrostatic pressure; Lining adhesion; Load appraisal of inspection opening and access cover; Pressure loss due to friction; Serviceability after kinking; Strength of assembly; Not applicableAS 1180.5; AS/NZS 1221 clauses 2.2.2.2, 2.2.2.3, 3.2.1, 3.2.2.1, 3.2.2.2, 3.2.2.3, 3.2.3, 3.2.4.2, 3.2.4.3, Appendices B, C, D, E, F, G; AS/NZS 2554 clauses 1.6, 2.2.1, 2.2.2, 2.2.3, 2.2.4, 2.3, 2.4, Appendix B; AS 2792 clauses 3.1.2, 3.1.3, 3.1.4, 3.1.5, 3.1.6, 3.1.7, 3.3.1, 3.3.2, 3.3.3, Appendices E, F, G, H, I, K, L, M 


ISO/IEC 17025 (2005)
Manufactured Goods

SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION/RANGE
Evaluation of electrical appliances and devices - PerformanceWater heatersBoiling time and efficiency; Electrical energy consumption; Overflow; Pressure measurement; Strength and dimensions of components; Temperature control; Temperature distribution; Torque; Not applicableAS 3498 Section 7.2, Appendices A, B, C; AS/NZS 4692.1 Sections 2.2.2, 2.2.3, 2.2.4, 5.2.1, 5.2.3, 5.3, 5.5.2.1, 5.6.5; AS/NZS 6400 Sections 2.1, 2.1.4, 2.2, 2.2.4, 2.3, 2.3.4, 2.4, 2.4.4, 2.5, 2.6,2.6.4, 2.7, 2.7.4

Material performance evaluation of elastomers, plastics and composite productsHosing material; Pipe material and related products; Adhesion; Bending properties; Compression; Dimensional stability; Dimensions; Flexing; Formability; Heat resistance; Impact resistance; Pull-out strength; Strength; Not applicableAS 2053.1 clauses 8.1, 8.2, 8.3, 8.4, 9.2, 9.3, 9.4, 9.5, 9.6, Appendices A, B, C, D; AS 2053.5 clauses 6, 7, 8, 9, 10, Appendices AA, BB, CC, DD 

Mechanical performance evaluation of components for building envelopes, framing and interior liningCable trunking systemsCable trunking system cover retention; Cable trunking system supporting capacity; Deflection; Dimensions; Finish; Impact resistance; Resistance to linear deflection; Squareness; Strength at ultimate limit state loading; Structural performance evaluation; Not applicableAS/NZS 4296 clauses 8, 9, 10, Appendices D, E, F, G

Performance evaluation of healthcare equipment and related itemsMedical suction tubingDimensions; Flow rate; Mass; Vacuum pressure - Degree of collapse; Not applicableAS 2120.3 clause 5.2, Appendix A

Products and appliances connected to the water supply - Physical evaluationSanitary fixtures - Urinals, water closet pan/suites, bidets, douche seats, cisterns and purpose built bathroom modulesDischarge; Flush performance; Flush volume; Hydraulic strength; Leakage; Leak tightness; Load; Splash; Wetting; Not applicableAS 1172.1 clauses 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, Appendices A, B, C, D, E, F, G, H; AS 1172 clauses 4.2, 4.3, 4.7, Appendices A, F; AS 1976 clauses 5.2, 5.3, 5.4, Appendices A, B, C; AS/NZS 3662 clauses 5.1, 5.2, 5.3, 5.4, 5.5, Appendices B, C, D, E; AS/NZS 3982 Appendices A, B, C, D; WMTS 5200.004 clauses 9.3, Appendix C; WMTS 5200.020 clauses 9.2, 9.3, 9.4; WMTS 5200.021 clauses 9.2, 9.3; WMTS 5200.051 clause 9.2, Appendix B 
 

Food waste disposal unitsAir gap; Back flow; Degree of fineness (FWDU); Drainage; Not applicableWMTS 5200.028 clauses 9.1, 9.2, 9.3, 9.4

Baths, sinks and basinsEndurance; Flow rate; Flush performance; Leak tightness; Spread angle; Strength of assembly; Thermal distortion; Not applicableAS/NZS 3662 clauses 5.4.1, 5.4.2, 5.4.3, 5.4.4, 5.5, 5.6.1, 5.6.2, Appendices B, C, D, E, F (2005); AS/NZS 3662 clauses 5.5.1, 5.5.2, 5.5.3, 5.5.4, 5.6, 5.7.1, 5.7.2, Appendices B, C, D, E, F; AS 3982 clauses 1.6.1, 1.6.2, 1.6.3, 1.6.4, Appendices A, B, C, D; AS 4775 clauses 6.5.1, 7.3.1, 8.3; AS/NZS 6400 clause 2.1.3

Water service products - Connectors, filters, fittings, hoses and pipesAir gap; Air separation distance; Bending properties; Compatibility; Crack propagation; Dimensions; Endurance; Flow rate; Functionality; Impact resistance; Joint strength; Leakage; Leak tightness; Load; Ovality; Pressure; Pressure cycling resistance; Rigidity; Seal integrity; Sliding fit; Socket fit; Strength of assembly; Thermal cycling; Thread form evaluation; Torque; Not applicableAS/NZS 1260 clauses 3.2.1, 3.2.2; AS 1432 clauses 4.3, 5.4.2; AS/NZS 1462.1 clauses 7, 8, 11; AS/NZS 1462.4, AS/NZS 1462.6; AS/NZS 1462.8; AS/NZS 1462.10; AS/NZS 1462.11; AS/NZS 1462.13; AS/NZS 1462.17; AS/NZS 1462.24; AS/NZS 1462.29; AS/NZS 1477 clauses 3.3.1, 3.3.3, 3.3.6, 3.4.1(b), 3.4.2, 3.4.3, 3.4.4, 3.5.1, 3.5.2; AS 1571 clause 8.2; AS 1589 clauses 1.7.4, 1.7.5, 1.9.2, 1.10, 1.13.3 up to DN 80, 3.3.1, 3.3.2, 3.3.3, 3.3.4, 3.3.5, 3.4.1, 3.4.2, 3.4.3, 3.5.1, 3.6.1, 4.9.1, 4.9.2, Appendices E, G, H;  AS 1926.3 clauses 5, 6.1, 6.2, Appendices A5.1, A5.2, A5.3, A5.4, B; AS 2280 clauses 2.5.2, 3.1, 3.1.1, 3.1.2.1, 3.1.2.2, 3.1.2.3, 3.1.2.4, 3.5.2.1, 3.5.2.2,4.2.2, Appendices F, H; AS 2419.3 clauses 4.2, 4.2.3, 4.2.3, 4.3, 4.3.2, 4.3.3, 4.3.4, 4.3.5, 4.3.6; AS/NZS 2492 clauses 3.8, 3.9; AS 2537 (1994) clauses 11.2.1, 11.2.3, 11.2.4, 11.2.5, 11.2.6, 11.2.7, 11.2.8, 11.2.9; AS/NZS 2537.3; AS/NZS 2642.3 clauses 12.2.1, 12.2.2, 12.2.3, 12.2.4, 12.2.5, 12.2.6, 12.2.7, 12.2., AS 2887 clauses 2.6.1, 2.6.3, 2.6.5; AS 2888.1; AS 2888.2; AS 2888.3; AS 2888.4; AS 2888.5; AS 2888.6; AS 2888.7; AS 2888.8; AS 2888.10; AS 3499 Clauses 8.2, 8.4, 8.5, 8.8, 8.9, Appendix C; AS 3518 (2004); AS 3688 clauses 3.2, 3.4, 3.5, 3.6, 3.7.1, 3.7.2, 3.8, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, Appendices C, D, E, F, G, H, I, J, K, L; AS/NZS 4129 clauses 1.8, 1.13.1, 1.13.2, 2.4.2, 2.4.3, 2.4.4, 2.4.5, 3.4, 3.5, 4.4.2, 4.4.3, 4.4.4, 4.4.5, 4.4.6, Appendices D,E; AS/NZS 4130 clauses 9.1, 10.1, 10.2, 10.4; AS/NZS 4327 clauses 4.1, 4.2,Appendices B, C, D, E, F; AS/NZS 4401 clauses 6.2, 6.3, 6.4, 7.2, 8; AS/NZS 4441 clauses 10, 11.1.1, 11.1.2, 13.2, 13.3, 13.4; AS/NZS 4765 clauses 3.2.3, 3.2.4, 3.2.7, 3.2.8, 3.2.9, 3.2.10, 3.3.1, 3.3.2, 3.3.3, Appendices B, D, E; AS/NZS 4793 clauses 4.1.2, 4.1.3, 4.1.5, 4.1.6, 4.4.1; AS/NZS 4798 Clause 3.3, 3.4, 3.5.1, 3.5.2, 4.2, 5.2, 5.3, 5.5, 5.5.5; AS/NZS 5065 clauses 3.3.1, 3.3.2, 3.4.1, 3.4.2, 3.4.3, 5.2; AS 5082.2 clauses 12.1, 12.2, Appendices C, D, E, F, G, H; AS/NZS 6400 clause 2.7.3; WMTS 5200.040 clause 9; WMTS 5200.053; WMTS 5200.475 clauses 9.2, 9.3, Appendices B, C; WMTS 5200.477 clause 9.4, Appendix C; WMTS 5200.482; EN 713; EN 714; EN 1053; EN 1054; EN 1055; EN 12293; EN 12294; EN 12295; ISO 1167.1;  ISO 1167.2; ISO 1167.3; ISO 1167.4;; ISO 3126; ISO 3459; ISO 3501; ISO 3503; ISO 13257; ISO 13479; ISO 13844; ISO 13845; ISO 13846; ISO 13954; ISO 13955; ISO 16422 clauses 10, 11.1.1, 11.1.2, 13.2, 13.3, 13.4; UK-WIS-4-24-01

Tap assemblies; Valves; Back flow; Bending properties; Closing pressure; Compatibility; Dimensions; Distortion; Endurance; Flow rate; Functionality; Hydrostatic pressure; Leakage; Leak tightness; Load; Pressure; Seal integrity; Spread angle; Strength of assembly; Thermal cycling; Torque; Not applicableAS 1357.2 clauses 3.2, 3.3, 7.2, 7.3, 7.4, 7.5, 9.4, Appendices E, L, M, N, V, W; AS 1628 clauses 4.2, 4.3, 4.4, 4.5, 5.6, Appendices B, C, D; AS 1910 clauses 4.2, 4.3, 4.4, Appendices C, D, E; AS 2419.2 clauses 4.3.2, 4.3.3, 4.3.4, 4.3.5, 4.3.6, Appendices D3, D4, D5, D6, D7; AS/NZS 2638.1 clauses 5.1.2, 5.1.3, 5.1.4, 5.1.5, 5.1.6, 5.1.7, 5.1.8, 5.1.9, 5.1.10, 5.1.11, 5.1.12; AS/NZS 2638.2 clauses 3.2, 3.3, 5.1.1, 5.1.2, 5.1.3, 5.1.4, 5.1.5, 5.1.6, 5.1.7, 5.1.8, 5.1.9, 5.1.10, 5.1.11, 5.1.12, 5.1.13, 5.1.14, 5.1.15; AS/NZS 2845.1; AS 3498 Appendices A, B; AS/NZS 3718 clauses 43.11, .3, 4.5, 4.6.2, 4.8, 4.9, 4.10, 4.11, 4.12, 4.15, Appendices D, F, G, H, I, J, K, L, M, Q; AS 3952 clauses 3.3.1, 3.3.3, 5.1.1, 5.1.2, 5.1.3, 5.4.1, Appendix A; AS 4032.1 clauses 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9, 4.10, Appendices D, E, F, G, H, I, J; AS 4032.2 clauses 3.2, 3.3.1, 3.3.2, 3.4, 4.4, Appendices C, D, F, G; AS 4794 clauses 5.1.2, 5.1.3, 5.1.4, 5.2.2, 5.2.3, 5.2.4, Appendices D, E; AS 4795 (2006) clauses 5.2.1 Test A, 5.2.2 Test B, 5.2.3 Test C, 5.2.4 Test D, 5.2.5 Test E, 5.2.6 Test F; AS 4796 clauses 4.2, 4.3, 4.4.1, 4.5, 4.7, 4.8, Appendices E, F, G, H, I; AS 5081 clauses 5.2.2, 5.2.3, 5.2.4, 5.2.5, 5.2.6, 5.3,2, 5.3.3, 5.3.4, 5.3.5, 5.3.6, 5.3.7, 5.3.8, 5.3.9; AS/NZS 6400 clause 2.6.3;  WMTS 5200.006 clauses 8.1, 8.3, 9.1, 9.2, 9.3, 9.4, Appendix A; WMTS 5200.012 clauses 9.2, 9.4.1, Appendices B, C; WMTS 5200.030 clauses 9.3, 9.4, Appendix C; WMTS 5200.037.2 clauses 8.1, 9.2, 9.3, 9.4, Appendices B, C, D, F; WMTS 5200.053 clause 9; WMTS 5200.460 clause 9.1; WMTS 5200.467 clauses 8.1, 8.3, 9.1, 9.3.2, 9.4; WMTS 5200.476 clauses 9.1,9.2; WMTS 5200.477 clauses 9.2, 9.3, 9.4, 9.5, Appendices B, C, D; WMTS 5200.481 clauses 9.2, 9.3, 9.4.1, 9.4.2, 9.4.3, 9.5, Appendices B, C; ISO/EN 817 clauses 8.3, 8.4, 8.5, 8.6, 8.7, 9.4, 9.5, 10.2, 10.4, 10.5, 10.6, 10.7, 11.2, 12.1, 12.2, 12.3, 13, Annexes A, B; ISO 5208 clauses 4.8, 4.9, 4.10, 4.11, 4.12

Water treatment appliances and systemsBurst pressure; Endurance; Hydrostatic pressure; Strength of assembly; Not applicableAS/NZS 3497 clauses 5.2, 5.3, 5.4; WMTS 5200.103 clauses 9.2, 9.3, 9.4; WMTS 5200.104 clause 9.3; WMTS 5200.105 clause 9.3


ISO/IEC 17025 (2005)
Materials

SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION/RANGE
Metallic corrosion evaluationCopper and copper alloysDezincification resistanceClassicalAS 2345 Appendix C

| Accreditation Number: 15698 | Site Number: 16850 | Printed on : 18-Nov-2018

 

--------------------- END OF SCOPE ----------------------