PRINT SCOPE


National Association of Testing Authorities, Australia

SCOPE OF ACCREDITATION



LMATS Pty Ltd
DARRA MECHANICAL TESTING LABORATORY
| Accreditation Number: 14931 | Site Number: 15120 |

Date of Accreditation: 17/02/2003

Address Details:
Unit 3/35 Bernoulli Street
DARRA, QLD 4076
AUSTRALIA
Website: www.lmats.com.au
Contact Details:
Mr Vince Paessler
+61(07) 33753262


Availability:Services available to external clients



Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

 

ISO/IEC 17025 (2017)
Manufactured Goods

SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION/RANGE
Evaluation of access protection productsAccess covers; Grates; Inspection covers; LoadNot applicableAS 3996 Appendix C

Material performance evaluation of metal productsReinforcing bar and steel prestressing materials for concreteBending properties; Proof load; Shear strength; Not applicableAS/NZS 4671, 
ISO 15630.1

Tubing/pipingBending properties; Flattening properties; Not applicableAS 2505.1, 
ASTM A370 clause A2.5

Threaded fasteners, bolts and nutsCompression; Proof load; Tension; Not applicableAS 4291.1,
AS 4291.2,
ISO 898.1,
ISO 898.2,
ASTM E9-89a
0.4 to 1000 kN

Welded test specimensNick-break fractureMacroscopic examination; Visual examination; ANSI AWS D1.1,
ANSI AWS D1.2,
AS/NZS 2205.4.1,
ASME IX,
BS EN 287-1,
EN ISO 9017,
ISO 9017

Fillet-break fractureMacroscopic examination; Visual examination; ANSI AWS D1.1,
ANSI AWS D1.2,
AS/NZS 2205.4.1,
ASME IX,
BS EN 287-1,
EN ISO 9017,
ISO 9017

Macroscopic examinationMacroscopic examinationANSI AWS D1.1,
ANSI DWS D1.2,
AS 2205.5.1,
ASME IX,
ASTM E340,
BS EN 287-1,
BS EN 1321,
BS EN ISO 5817,
ISO 5817

Prepared metallic test specimens; Welded test specimens; HardnessBrinellAS 1816.1,
ASTM E10,
ISO 6506-1
2.45 to 29.4 kN 


HardnessVickersAS 1817.1,
AS 2205.6.1,
AS 4291.1,
AS/NZS 4291.2,
ASTM E92,
BS EN 1043-1,
BS EN 288-3,
BS EN 9015.1,
ISO 898.1,
ISO 898.2,
ISO 6507-1
0.49 to 294 N

Impact resistanceCharpy - Assessment of fracture appearance; Charpy - Lateral expansion; Charpy V-notch - Impact value; AS 1544.2,
AS 1544.5,
AS 2205.7.1,
ASTM E23,
BS EN 288-3,
BS EN 875,
BS EN 9016,
BS EN 10045-1,
ISO 148-1
at ambient temperature down to -160°C and at -196°C


Bending propertiesLongitudinal guided bendANSI AWS D1.1,
ANSI AWS D1.2,
AS 2505.1,
AS 2205.3.1,
ASME IX,
ASTM E190,
ASTM E290,
ASTM E381

Tensile propertiesAll-weld-metal tensile; Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; Uniaxial tension; ANSI AWS D1.1,
ANSI AWS D1.2,
AS 1391,
AS 2205.2.1,
AS 2205.2.2,
ASME IX,
ASTM A370,
ASTM E8M,
BS EN 288-3,
BS EN 895,
BS EN 4136,
BS EN 10002-1,
BS EN 15614.1,
ISO 6892.1,
0.4 to 1000 kN

| Accreditation Number: 14931 | Site Number: 15120 | Printed on : 18-Jun-2021

 

--------------------- END OF SCOPE ----------------------