PRINT SCOPE


National Association of Testing Authorities, Australia

SCOPE OF ACCREDITATION



Aitken Rowe Testing Laboratories Pty Ltd
ARTL WAGGA
| Accreditation Number: 4679 | Site Number: 4672 |

Address Details:
4/2 Riedell Street
WAGGA WAGGA, NSW 2650
AUSTRALIA
Website: www.aitkenrowe.com.au
Contact Details:
Mr Gary Lyons
+61(02) 69395555


Availability:Services available to external clients



Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

 

ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity

SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION/RANGE
Accreditation is held to establish new branch sitesMaterials defined by all or some for which the site is accreditedDeterminations defined by all or some for which the site is accreditedTechniques defined by all or some for which the site is accredited
Establishment of annex facilitiesMaterials defined by all or some for which the site is accreditedDeterminations defined by all or some for which the site is accreditedTechniques defined by all or some for which the site is accredited
Evaluation of geotechnical and civil construction material - Aggregate binder adhesionAggregatesInitial adhesionRMS (NSW) Method T238

Resistance to strippingPlate testRMS (NSW) Method T230

Evaluation of geotechnical and civil construction material - Aggregate contaminantsAggregatesSugarFehlings solutionAS 1141.35, RMS (NSW) Method T269

Light particles contaminantsSegregation by densityAS 1141.31

Organic impuritiesColour testRMS (NSW) Method T260

Coarse aggregate qualityVisual comparisonAS 1141.30.1

Clay and fine siltSettlingAS 1141.33, RMS (NSW) Method T268

Weak particles contaminantsSieve analysisAS 1141.32, RMS (NSW) Method T202

Evaluation of geotechnical and civil construction material - Aggregate propertiesAggregatesShapeProportional calliperAS 1141.14, RMS (NSW) Method T213

Particle size distributionFine particles in road materialsAS 1141.19, RMS (NSW) Method T107

ShapeAverage least dimensionAS 1141.20.1, AS 1141.20.2, AS 1141.20.3, RMS (NSW) Method T235, T275

Particle density of fine aggregateWeighing-in-waterAS 1141.5, RMS (NSW) Method T210

Particle size distributionSieve analysis of material finer than 75 μmAS 1141.12, RMS (NSW) Method T203

SoundnessExposure to sodium sulfate solutionAS 1141.24, RMS (NSW) Method T266

Bulk densityUncompactedAS 1141.4, RMS (NSW) Method T211

ShapeCrushed facesRMS (NSW) Method T239

Particle density of coarse aggregateWeighing-in-waterAS 1141.6.1, RMS (NSW) Method T209

Aggregate crushing valueNot applicableAS 1141.21

ShapeFlakinessAS 1141.15

Wet/dry strength variationNot applicableAS 1141.22,  RMS (NSW) Method T215

Particle size distributionSieve analysisAS 1141.11.1, RMS (NSW) Method T201

ShapeRatio greatest to least dimensionRMS (NSW) Method T278

Bulk densityCompactedAS 1141.4, RMS (NSW) Method T212

Evaluation of geotechnical and civil construction material - Asphalt field densityAsphaltsField densityNuclear gauge direct transmission modeAS 2891.14.1.1

Density ratio and air voidsNot applicableAS 2891.14.5

Field densityNuclear gauge backscatter modeAS 2891.14.1.2

Evaluation of geotechnical and civil construction material - Asphalt volumetric propertiesAsphaltsBulk densityPresaturationAS 2891.9.2

Bulk densityMensurationAS 2891.9.3

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar consistence in-situConcrete, grout and mortarSlump flowConeAS 1012.3.1, RMS (NSW) Method T301

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar propertiesConcrete, grout and mortarMass per unit volume - Fresh concreteIn-situ measurement using fixed volume measureAS 1012.5, RMS (NSW) Method T303

Wet sieving analysisNot applicableRMS (NSW) Method T329

Compressive strengthCylinderAS 1012.9, RMS (NSW) Method T306

Mass per unit volume - Hardened concreteWater displacementAS 1012.12.2, RMS (NSW) Method T317

Air content of freshly mixed concreteReduced air pressureAS 1012.4.2, RMS (NSW) Method T320

Compressive strengthCoreAS 1012.14, RMS (NSW) Method T310

Mass per unit volume - Hardened concreteDimensionsAS 1012.12.1, RMS (NSW) Method T316

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar specimen manufacture and curingConcrete, grout and mortarSpecimen conditioningWet conditioning of hardened concrete core specimensAS 1012.14

Specimen manufacture and curingManufacture and curing of drying shrinkage specimens in the laboratoryAS 1012.8.4, RMS (NSW) Method T312

Specimen manufacture and curingIn-situ manufacture and curing of flexural strength specimensRMS (NSW) Method T327

Specimen manufacture and curingManufacture and curing of cylindrical specimens in the laboratoryAS 1012.8.1, RMS (NSW) Method T304

Specimen manufacture and curingManufacture and curing of flexural strength specimens in the laboratoryAS 1012.8.2

Specimen manufactureMixing concrete in the laboratoryAS 1012.2, RMS (NSW) Method T314

Evaluation of geotechnical and civil construction material - Road pavement surfacing characteristicsRoad pavementsTexture depthSand patchRMS (NSW) Method T240

Evaluation of geotechnical and civil construction material - Rock propertiesRocksPoint load strength indexNot applicableRMS (NSW) Method T223

Evaluation of geotechnical and civil construction material - Soil classificationSoilsLiquid limitCasagrande four pointAS 1289.3.1.1, RMS (NSW) Method T108

Moisture contentHot plateRMS (NSW) Method T121

Particle densityNot applicableAS 1289.3.5.1

Plastic limitNot applicableAS 1289.3.2.1, RMS (NSW) Method T109

Plasticity indexCasagrandeAS 1289.3.3.1, RMS (NSW) Method T109

Moisture contentDrying ovenAS 1289.2.1.1, RMS (NSW) Method T120
Linear shrinkageNot applicableAS 1289.3.4.1, RMS (NSW) Method T113

Sieve analysisNot applicableAS 1289.3.6.1, RMS (NSW) Method T106

Liquid limitCasagrande one pointAS 1289.3.1.2

Fine particles in road materialsNot applicableRMS (NSW) Method T107

Evaluation of geotechnical and civil construction material - Soil compaction characteristicsSoilsMinimum and maximum dry densityNot applicableAS 1289.5.5.1
Dry density/moisture content relationshipModified compactive effortAS 1289.5.2.1, RMS (NSW) Method T112

Dry density/moisture content relationshipThree compaction pointRMS (NSW) Method T162

Maximum dry densityNot applicableRMS (NSW) Method T164
Dry density/moisture content relationshipStandard compactive effortAS 1289.5.1.1, RMS (NSW) Method T111, RMS (NSW) Method T130

Evaluation of geotechnical and civil construction material - Soil engineering propertiesSoilsPermeabilityFalling head for a remoulded specimenAS 1289.6.7.2

Penetration in-situDynamic coneAS 1289.6.3.2, RMS (NSW) Method T161

Compressive strengthUniaxial maximum dryRMS (NSW) Method T114

Bearing ratioRemoulded specimensAS 1289.6.1.1, RMS (NSW) Method T117

DispersionEmerson classAS 1289.3.8.1

Fine particle analysisHydrometerAS 1289.3.6.3

ReactivityShrink/swellAS 1289.7.1.1

Evaluation of geotechnical and civil construction material - Soil field densitySoilsDensity indexCalculationAS 1289.5.6.1
Density - In-situSand-coneAS 1289.5.3.1, RMS (NSW) Methods T119, T165

Density - In-situSand pouring apparatusAS 1289.5.3.2

Field moisture contentNuclear gaugeAS 1289.5.8.1, RMS (NSW) Method T173

Relative compactionNot applicableRMS (NSW) Method T166

Compaction controlHilfAS 1289.5.7.1

Dry density ratioCalculationAS 1289.5.4.1

Evaluation of geotechnical and civil construction material - Soil natural contaminantsSoilsAciditypHAS 1289.4.3.1, RMS (NSW) Method T123
Evaluation of geotechnical and civil construction material - Soil pre-treatmentSoilsSoil pre-treatmentNot applicableAS 1289.1.1, RMS (NSW) Methods T102, T105

Soil pre-treatmentAccelerated weathering pre-treatmentRMS (NSW) Method T103

Evaluation of geotechnical and civil construction material - Soil stabilisationSoilsLime contentCalculationRMS (NSW) Method T144
Stabiliser rate of spread rateIn-situ measurementRMS (NSW) Method T136

Compressive strengthUniaxial unconfinedRMS (NSW) Method T116, T131

Sample collectionAsphaltsNot applicableUncompacted asphaltAS 2891.1.1

Not applicableExtraction of an asphalt core - Dry technique; Extraction of an asphalt core - Wet technique; AS 2891.1.2

Concrete, grout and mortarNot applicableFresh concrete from a mixer; Fresh concrete from deposited concrete; AS 1012.1,  RMS (NSW) Method T300

Not applicableHardened concrete by coringAS 1012.14 

AggregatesNot applicableAggregate from a conveyor belt; Aggregate from a stockpile; Aggregate from a truck; AS 1141.3.1

SoilsNot applicableUndisturbed soil sampling by open-drive samplerAS 1289.1.3.1, RMS (NSW) Method T164

Not applicableDisturbed sampling from earthwork; Disturbed soil sampling from a pavement; Disturbed soil sampling from a stockpile; AS 1289.1.2.1, RMS (NSW) Method T100

| Accreditation Number: 4679 | Site Number: 4672 | Printed on : 18-Nov-2019

 

--------------------- END OF SCOPE ----------------------