Thermo Fisher Scientific Australia Pty Ltd

Site

National Service Department

Accreditation No.

2145

Site No.

2138

Date of Accreditation

01 Feb 1983

Address

5 Caribbean Drive
Scoresby, VIC 3179
Australia

thermofisher.com.au

Contact

Mr Ian Walker P: +61 0418892711

Availability

Services available to external clients

Scope of Accreditation

Print scopes
National Service Department

ISO/IEC 17025 (2017)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Service Product Determinant Technique Procedure Limitations
DC and low frequency electrical metrology - Electrical instrument calibrators Instrument calibrators AC voltage; DC current; DC voltage; Resistance Direct measurement against a reference standard

Capability

with Calibration and Measurement Capability of -  

DC voltage
0.0013% + 3 μV up to 0.1 V
0.0007% above 0.1 V to 1 V 
0.0006% above 1 V to 10 V
0.0009% above 10 V to 100 V 
0.0025% above 100 V to 1000 V

AC voltage
0.04% + 1.1 μV from 0 V to 0.01 V and from 10 Hz to 1 kHz
0.06% + 1.1 μV from 0 V to 0.01 V and from 1 kHz to 20 kHz 
0.15% from 0.01 V to 0.1 V and from 10 Hz to 1 kHz 
0.03% from 0.01 V to 0.1 V and from 1 kHz to 20 kHz 
0.01% from 0.1 V to 1 V and from 10 Hz to 1 kHz 
0.02% from 0.1 V to 1 V and from 1 kHz to 10 kHz 
0.034% from 0.1 V to 1 V and from 10 kHz to 50 kHz 
0.09% from 0.1 V to 1 V and from 50 kHz to 100 kHz 
0.35% from 0.1 V to 1 V and from 100 kHz to 300 kHz 
0.01% from 1 V to 10.0 V and from 10 Hz to 1 kHz 
0.02% from 1 V to 10.0 V and from 1 kHz to 20 kHz 
0.033% from 1 V to 10.0 V and from 20 kHz to 50 kHz 
0.09% from 1 V to 10.0 V and from 50 kHz to 100 kHz 
0.022% from 10 V to 100.0 V and from 10 Hz to 1 kHz 
0.023% from 10 V to 100.0 V and from 1 kHz to 20 kHz 
0.045% from 100 V to 1000 V and from 10 Hz to 1 kHz 

DC current
0.007% + 0.3 nA from 0 μA to 100 μA
0.005% above 100 μA to 1 mA 
0.004% above 1 mA to 10 mA
0.007% above 10 mA to 100 mA
0.017% above 100 mA to 1 A

Resistance
0.003% + 60 μΩ from 0 Ω to 10 Ω
0.002% above 10 Ω to 100 Ω 
0.0013% above 100 Ω to 10 kΩ
0.0015% above 10 kΩ to 100 kΩ
0.003% above 100 kΩ to 1 MΩ
0.007% above 1 MΩ to 10 MΩ
DC and low frequency electrical metrology - Electrical measurement and test equipment Ammeters; Data recorders; Digital multimeters (DMM); Ohm meters; Voltmeters AC voltage; DC current; DC voltage; Resistance Comparison with a reference standard

Capability

with Calibration and Measurement Capability of -  

DC voltage
0.0013% + 3μV from 0 V to 0.1 V
0.0013% + 5μV above 0.1 V to 1 V
0.0020% + 100μV above 1 V to 10 V
0.0030% + 2mV above 10 V to 100 V
0.0022% + 2mV above 100 V to 1000 V

AC voltage
0.040% + 15 μV from 0 V to 0.01 V (10 Hz to 1 kHz)
0.055% + 15 μV from 0 V to 0.01 V (1 kHz to 20 kHz)
0.10% + 5 μV from 0.01 V to 0.1 V (10 Hz to 1kHz)
0.050% + 25 μV from 0.01 V to 0.1 V (1 kHz to 20 kHz)
0.010% + 300 μV from 0.1 V to 1 V (10 Hz to 1 kHz)
0.015% + 300 μV from 0.1 V to 1 V (1 kHz to 10 kHz)
0.033% + 800 μV from 0.1 V to 1 V (10 kHz to 50 kHz)
0.085% + 3 mV from 0.1 V to 1 V (50 kHz to 100 kHz)
0.55% + 10 mV from 0.1 V to 1 V (100 kHz to 300 kHz)
0.013% + 3 mV from 1 V to 10 V (10 Hz to 1 kHz)
0.015% + 3 mV from 1 V to 10 V (1 kHz to 20 kHz)
0.033% + 8 mV from 1 V to 10 V (20 kHz to 50 kHz)
0.080% + 30 mV from 1 V to 10 V (50 kHz to 100 kHz)
0.022% + 20 mV from 10 V to 100 V (10 Hz to 1 kHz)
0.022% + 35 mV from 10 V to 100 V (1 kHz to 20 kHz)
0.040% + 0.6 V from 100 V to 1000 V (10 Hz to 1 kHz)

DC current
0.020% + 0.05 μA from 0 μA to 100 μA
0.020% + 0.05 μA above 100 μA to 1 mA
0.020% + 0.05 μA above 1 mA to 10 mA
0.020% + 0.5 μA above 10 mA to 100 mA
0.030% + 3 μA above 100mA to 1A

Resistance
0.0050% + 3 mΩ from 0 Ω to 10 Ω
0.0050% + 70 mΩ above 10 Ω to 100 Ω
0.0050% + 70 mΩ above 100 Ω to 10 kΩ
0.0050% above 10 kΩ to 100 kΩ
0.0050% above 100 kΩ to 1 MΩ
0.019% above 1MΩ to 10 MΩ
DC and low frequency electrical metrology - Electrical standards Conductance boxes; Precision resistors; Resistance boxes Resistance Comparison with a reference standard

Capability

with Calibration and Measurement Capability of -  

0.003% + 60 μΩ from 0 Ω to 10 Ω 
0.002% above 10 Ω to 100 Ω 
0.0013% above 100 Ω to 10 kΩ
0.0015% above 10 kΩ to 100 kΩ
0.003% above 100 kΩ to 1 MΩ
0.007% above 1 MΩ to 10 MΩ
Dimensional metrology - Engineering equipment and precision instrumentsincluding on-site calibrations Centrifuges Rotational speed Comparison with a reference standard by differential measurement

Capability

including on-site calibrations
with Calibration and Measurement Capability of -
3 rpm from 300 rpm to 15000 rpm
Mass - Determination of mass and calibration of weighing devicesincluding on site calibrations Laboratory weighing devices; Precision laboratory balances Mass Gravimetric measurement against reference mass

Capability

Including on site calibrations

with Calibration and Measurement Capability of-


Precision laboratory balances
2.5 in 106 or 20 μg (whichever is greater) from 10 mg to 10 kg


Industrial balances
1 in 105 in the range from 10 kg to 200 kg
Pressure metrology - Pressure and vacuum measuring equipment Air data test sets; Altimeters Absolute pressure; Gauge pressure Comparison with dead weight tester; Comparison with reference instrument

Capability

With calibration and measurement capability of -  

Pneumatic Gauge
0.0025% or 0.002 kPa (whichever is greater) from -100 kPa to -2 kPa and 2 to 190 kPa
0.0035% or 0.002 kPa (whichever is greater) above 190 kPa to 7 MPa

Pneumatic Absolute
0.0025% or 0.002 kPa (whichever is greater) from 2 kPa to 190 kPa
0.0035% or 0.002 kPa (whichever is greater) above 190 kPa to 7 MPa
Barometers; Digital pressure gauges; Manometers; Mechanical pressure gauges; Pressure control devices; Pressure recorders; Pressure transducers; Vacuum gauges Absolute pressure; Gauge pressure By pressure calibrator; Comparison with dead weight tester AS 1349

Capability

Self-indicating types and transducers with voltage, current and frequency outputs Digital manometers

With Calibration and Measurement Capability of-


Pneumatic Gauge pressure

0.0025% or 0.002 kPa (whichever is greater) in the range from -100 kPa to -2 kPa and 2 kPa to 190 kPa

0.0035% or 0.002 kPa (whichever is greater) in the range above 190 kPa to 7 MPa


Pneumatic Absolute pressure

0.0025% or 0.002 kPa (whichever is greater) in the range from 2 kPa to 190 kPa

0.0035% or 0.002 kPa (whichever is greater) in the range above 190 kPa to 7 MPa


Hydraulic Gauge pressure

0.007% or 0.08 kPa (whichever is greater) in the range from 500 kPa to 70 MPa


Hydraulic Absolute pressure

0.007% or 0.15 kPa (whichever is greater) in the range from 600 kPa to 70 MPa
Temperature metrology - Ancillary temperature measuring equipment Digital voltmeters (DVM) and digital multimeters (DMM); Multi-channel thermocouple data recorders; Process calibrators Resistance to temperature conversion; Volt to temperature conversion Direct measurement by electrical input by the methods of Manual E0211

Capability

with Calibration and Measurement Capability of -  

0.1% of range from -200 ºC to 2360 ºC
Temperature metrology - Temperature measuring equipmentincluding on-site calibrations Digital temperature measuring systems Temperature Measurement against reference standard by the methods of Manual E0211

Capability

including on-site calibrations
with Calibration and Measurement Capability of -  
0.05 oC from -40 oC to 300 oC
0.25 oC above 300 oC to 650 oC
Temperature metrology - Temperature standards and reference equipment Dry block calibrators Temperature Direct measurement using a reference standard EA 10/13

Capability

with Calibration and Measurement Capability of -  
0.5 oC In the range from -40 oC to 650 oC
Temperature metrology - Verification of controlled enclosuresincluding on-site calibrations Environmental chambers - Temperature; Freezers; Incubators; Ovens Spatial uniformity; Temperature Direct temperature measurement AS2853

Capability

including on-site calibrations
with Calibration and Measurement Capability of
1.0  ºC from -80 ºC to 0 ºC
 0.5 ºC above 0 ºC to 150 ºC
Time and frequency metrology - Frequency and time standards Signal sources Frequency Comparison with a reference standard

Capability

with Calibration and Measurement Capability of
0.05% of reading from 1 Hz to 40 Hz
0.01% of reading above 40 Hz to 10 MHz
Time and frequency metrology - Frequency, time and waveform measuring equipment Counters; Time interval meters Frequency Measurement against reference standard

Capability

with Calibration and Measurement Capability of -  

Counters
0.05% of reading from 1 Hz to 40 Hz 
0.01% of reading above 40 Hz to 10 MHz

Time interval meters
0.01% of reading from 100 ns to 1 s
Frequency meters Frequency Measurement against reference standard

Capability

with Calibration and Measurement Capability of -  

0.05% of reading from 1 Hz to 40 Hz 
0.01% of reading above 40 Hz to 10 MHz
Volume and density - Laboratory volumetric glassware and measures Pipettes; Piston operated volumetric apparatus (POVA) Volume Gravimetric ISO 8655-6

Capability

with Calibration and Measurement Capability of -  

0.070 μL from 0.20 μL to 10 μL

0.080 μL above 10 μL up to 50 μL

0.10 μL above 50 μL up to 100 μL

0.14 μL above 100 μL up to 200 μL

0.20 μL above 200 μL up to 300 μL

0.36 μL above 300 μL up to 500 μL

0.62 μL above 500 μL up to 1 mL
3.9 μL above 1 mL  up to 5 mL
6.1 μL above 5 mL  up to 10 mL
18 μL above 10 mL up to 30 mL
35 μL above 30 mL up to 60 mL

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.