PRINT SCOPE


National Association of Testing Authorities, Australia

SCOPE OF ACCREDITATION



Golder Associates Pty Ltd
MELBOURNE LABORATORY
| Accreditation Number: 1910 | Site Number: 1903 |

Date of Accreditation: 27/02/1985

Address Details:
Building 7, Botanicca Corporate Park
570-588 Swan Street
RICHMOND, VIC 3121
AUSTRALIA
Website: www.golder.com
Contact Details:
Mr Mark Tulau
+61(03) 88623655


Availability:Services available to external clients



Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

 

ISO/IEC 17025 (2017)
Environment

SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION/RANGE
Analysis for asbestos, mineral fibres (including synthetic) and organic fibresAir - IndoorSynthetic mineral fibres (SMF); Volume measurement; Membrane filterin-house OH/A8 and NOHSC: 3003 (2005) GuidanceNote on the Membrane Filter Method for Estimating Airborne Asbestos Fibres (Sampling only)

Analysis for elementsEmissions - IndustrialFluorineClassicalNSW EPA TM-9, SA EPA 03.03 

Analysis for hydrocarbonsEmissions - IndustrialVolatile organic compounds (VOCs)ClassicalNSW EPA TM-34, USEPA Method 18

Air - AmbientAromatic halogenated hydrocarbonsClassicalUSEPA TO-13A, in-house S5

Emissions - StackHydrocarbonsClassicalNIOSH 1003

Analysis for industrial chemicalsAir - AmbientFluoride; Fluoride - Gaseous; Continuous monitoring analyserAS 3580.10.1 

Analysis for organic vapoursVapoursVolume measurementAbsorption tubeAS 2986 

Air - Indoor; Sorbent tubes; Vapours; Volume measurementAbsorption tubein-house OH/A11 

Analysis for petroleum hydrocarbonsEmissions - IndustrialVolatile organic compounds (VOCs)Gas chromatography (GC)in-house A13

Analysis for physical and chemical characteristicsEmissions - IndustrialNitrogen - OxidisedClassicalNSW EPA TM 11, USEPA Method 7C, 7E and SA EPA 03.06 

Particulate matter - TotalGravimetricAS 4323.1, SA EPA 03.01 and in-house P1

Particulate matterGravimetricISO 9096, USEPA Method 5, 17 and in-house P1, L2

OzoneAutoanalyser (AA)In-house O5

Coarse particulates: PM2.5 - PM10ClassicalNSW EPA OM-9

Stack gas concentrationClassicalSA EPA 03.14

Solids - TotalClassicalNSW EPA TM-15

Particulate matter - PM2.5; Particulate matter - PM10; ClassicalUSEPA 201A 

Hydrogen sulfideClassicalNSW EPA TM-5 and SA EPA 03.05 

AcidityClassicalSA EPA 03.11

Particulate matter - PM2.5; Particulate matter - PM10; Tapered element oscillating microbalance (TEOM)In-house P14

Emissions - Industrial; Emissions - Stack; MoistureClassicalNSW EPA TM-22, SA EPA 03.13, USEPA Method 4 and in-house M5

Flow rate; Pressure; Velocity; ClassicalNSW EPA TM-2
OdourClassicalAS 4323.2, NSW EPA OM-7,  SA EPA 03.15, SA EPA 03.16 and in-house O4

TemperatureClassicalin-house method T6

Air - AmbientParticulate matter - PM10Tapered element oscillating microbalance (TEOM)AS 3580.9.8 

Suspended particulate matter - TotalHigh volume gravimetricAS 3580.9.3

Particulate matter - PM10GravimetricIn-house P8

Particulate matterDirectional dust gaugeAS 3580.10.2
Carbon dioxide (CO2); Carbon monoxide; Nitrogen - Oxidised; Oxygen; Sulfur dioxide; Continuous monitoring analyserIn-house C6

Formaldehyde (methanal)ClassicalAS2365.6, in-house V9, A13, P13 

Sulfur dioxideDirect reading instrumentAS 3580.4.1

Suspended particulate matter - PM10High volume gravimetricAS 3580.9.6 

Carbon dioxide (CO2); Oxygen; Classicalin-house C6, O1

Nitrogen - OxidisedClassicalAS3580.5.1, AS2365.1.1, AS2365.1.2

Particulate matter - PM2.5GravimetricIn-house P10

Suspended particulate matter - PM10Beta attenuation monitorsAS 3580.9.11

Particulate matter - PM10Tapered element oscillating microbalance (TEOM)AS 3580.9.16 
Suspended particulate matter - PM10Low volume gravimetricAS 3580.9.9

Particulate matter - PM2.5GravimetricAS 3580.9.14
Suspended particulate matter - TotalClassicalAS2365.7 

Particulate matter - PM2.5; Particulate matter - PM10; Suspended particulate matter - Total; Low volume gravimetricin-house L2

Humidity; Temperature; Classicalin-house method M9

Ash; Combustible matter; Solids - Insoluble; Solids - Total; Suspended particulate matter - PM2.5; AS 3580.10.1
In-house D3

Suspended particulate matter - PM2.5Beta attenuation monitorsAS 3580.9.10, L2

Suspended particulate matter - PM2.5Low volume gravimetricAS 3580.9.10, L2

Carbon monoxideDirect reading instrumentAS 3580.7.1, AS2365.2 

Nitrogen - OxidisedChemiluminescenceAS 3580.5.1

Particulate matter - PM2.5; Particulate matter - PM10; Classicalin-house P12 

Particulate matter - PM2.5; Particulate matter - PM10; Suspended particulate matter - Total; High volume gravimetricin-house H3

Particulate matter - PM2.5Tapered element oscillating microbalance (TEOM)AS 3580.9.13 
Emissions - StackCarbon dioxide (CO2)ClassicalNSW EPA TM-24

Sulfuric acid as SO3; Sulfuric acid mist; Classical; Gravimetric; NSW EPA TM-3, SA EPA 03.02, USEPA Method 8, in-house S1 and S2

Sodium hydroxideClassical in-house S3

Carbon dioxide (CO2); Carbon monoxide; Nitrogen - Oxidised; Oxygen; Sulfur dioxide; Continuous monitoring analyserIn-house C6, USEPA Method 10

Carbon dioxide (CO2); Oxygen; ClassicalUSEPA Method 3, USEPA Method 3A, in-house C6, O1

SulfurClassicalSulfur dioxide - NSW EPA TM-4, USEPA Methods 6, 8 and in-house S1, S2
Total reduced sulfur - USEPAMethod 16A - Total reduced sulfur and in-house T5

Fluoride - TotalClassicalUSEPA Method 13B

Formaldehyde (methanal)ClassicalIn-house F5

Dry gas density; Molecular weight; ClassicalNSW EPA TM-23, in-house M8

FluorideIon selective electrode (ISE)In-house F1

OxygenClassicalNSW EPA TM-25

Carbon monoxideClassicalNSW EPA TM-32, USEPA Method 10 and SA EPA 03.12, 03.14

Analysis for respirable quartzAir - IndoorCrystalline silica (mass) - Quartz; Volume measurement; Membrane filterin-house OH/A8 and NOHSC: 3003 (2005) GuidanceNote on the Membrane Filter Method for Estimating Airborne Asbestos Fibres (Sampling only)
Analysis of dustDustDust - RespirableGravimetricAS 2985 

Dust - InhalableAS 3640 

Analysis of the workplace environment and hazards for inorganic gasesAir - IndoorAmmonia; Chlorine; ClassicalOH/A6, OH/C7, OH/C2

Meteorological monitoringAtmospherePressure; Radiation - Global; Rainfall; Rainfall - Calculated; Relative humidity (RH); Solar radiation; Temperature; Wind direction; Wind speed - Horizontal; ClassicalAS 3580.14 

Pressure; Radiation - Global; Rainfall; Rainfall - Calculated; Relative humidity (RH); Solar radiation; Temperature; Wind direction; Wind speed - Horizontal; Classical; Hygrometer; Pyranometer; In-house M9

Sample collectionEmissions - IndustrialNot applicableContinuous flow analyser (CFA)CARB 429 - Determination of polycyclic aromatichydrocarbon (PAH) emissions from stationary sourcesNIOSH 2002 - Amines, aromatic
NIOSH 2010 - Aliphatic, amines
SA EPA 03.04 Chlorine
SA EPA 03.07 Metals
USEPA Method 23 - Dioxins and Furans
USEPA 26 Halides; halogens; hydrogen chloride
USEPA 26A Hydrogen halide; halogens by isokinetic
USEPA Method 29 - Metals
in-house methods
A2 - Ammonia
A14 - Atmospheric contaminants; odour (isolation flux chamber)
C1 - Chloride
C2 - Chlorine
C4 - Cyanides
C9 - Evacuated canisters for VOC and reduced sulfur compounds
G4 - Ammonia, chloride, chlorine, cyanide, fluoride, formaldehyde, hydrogensulphide, MDI, nitrogen oxides, TDI
H1 - Hydrogen sulphide
I1 - Isocyanates
I2 - Inorganic acids
M1 - MDI
M2 - Metals (acid extractable)
M4 - Mercaptans
N1 - Nitrogen oxides
P6 - Polychlorobenzenes (to be A13)
P7 - Phosphine
S4 - Semi-volatile organics
T1 - TDI (toluene diisocyanate)
TP 13 - Soil gas bore sampling for organic gases
V5 - Volatile principal organic hazardous constituents (POHCs) 

Air - AmbientNot applicableAdsorption tube; Canisters;
Not applicableGas analyserUSEPA TO-10A - Semi-volatile compounds

Not applicableAutomatedAS 2724.5 - Directional dust deposit gauge formetals
USEPA TO-4A - pesticides and polychlorinated biphenyls
USEPA TO-9A - Polychlorinated, polybrominated, brominated/chlorinateddibenzo-p-dioxins, bibenzofurans
USEPATO-13A - Polycyclic aromatic hydrocarbons

Not applicablePassive diffusiveIn-house P13- for aldehydes; ammonia;BTEX; hydrochloric acid; hydrogen fluoride; hydrogen sulfide; nitrate; ozone;phenols; sulfur dioxide; volatile organic compounds

Not applicableActive sampling onto sorption tubesUSEPA TO-17 - Volatile organic compounds
In-house A15-Aldehydes andketones 
In-house V9 - VOCs 

Not applicableSiting of air monitoring equipmentAS 3580.1.1

Not applicableCanistersUSEPA TO-14 - Volatile organic compounds 
USEPA TO-15 - Volatile organic compounds 
In-house C9 - volatile organic compounds and reduced sulphur compounds

Not applicableHigh volume air sampler (HVAS)In-house S5 - Dioxins; furans;pesticides; polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) (as listed in the method) 

Air - IndoorNot applicableAutomatedIn-house OH/A2 - Sampling for hydrogen fluoride,hydrochloric acid, hydrobromic acid, nitric acid, phosphoric acid, sulfuricacid
in-houses OH/E1 for metals
in-houses OH/I3 - Isocyantes (MDI, HDI, TDI)
in-houses OH/P3 - Plasticisers 

Sample collection - Stack and emissions samplingEmissionsOil mistDilution/filter/condensation/adsorption - IsokineticIn-house O2, OH/O2

Emissions - IndustrialSampling - Area sourcesFlux chamberAS 4323.4

Sampling points - SelectionIsokineticSA EPA 03.09, USEPA Method 1

Acid gasesDilution/filter/condensation/adsorption - Isokineticin-house A11

Sampling position - SelectionIsokineticAS 4323.1, NSW EPA TM-1

2-Butoxyethanol; 2-Ethoxyethyl acetate (ethylene glycol monoethyl ether acetate, cellosolve acetate, EGMEA); 2-Methoxyethanol; 2-Methylpropan-2-ol (tert-butanol, tert-butyl alcohol); 4-Methyl-2-pentanone (methyl isobutyl ketone, MIBK); Acetone; Acrylonitrile; Aldehydes; Alkenes hydrocarbons; Allyl alcohol; Benzene; Butanone (methyl ethyl ketone, MEK, 2-butanone); Chlorinated hydrocarbons; Cyclohexanol; Cyclohexanone; Diacetone alcohol (2-pentanone, 4-hydroxy-4-methyl-2-pentanone); Dichloromethane (DCM, methylene chloride); Esters: C1-C10; Ethanol; Ethylbenzene; Hexane (n-hexane); Hydrocarbons: C1-C10; Isoamyl alcohol; Isobutyl alcohol (isobutanol, 2-methylpropan-1-ol); Isooctane; Isophorone (isoforone, isoacetophorone); Methanol; Methyl isobutyl carbinol (4-methylpentan-2-ol, MIBC); n-Butanol; N-Methyl-2-pyrrolidone (NMP); Nonane (n-nonane); Pentane (n-pentane); sec-Butanol (sec-butylalcohol, 2-butanol); Styrene (ethenyl benzene); Toluene; Vinyl chloride; Xylene; Impinger/sorbent tubein-house A13

Cresol; Phenols; Impinger/sorbent tubeNIOSH 2546 

| Accreditation Number: 1910 | Site Number: 1903 | Printed on : 18-Jun-2021

 

--------------------- END OF SCOPE ----------------------