NATA


Facilities and Labs

New Search |

Enersol Pty Limited

Accreditation No: 11444
www.enersol.com.au
 
Contact: Mr Hung Truong
Mobile: 0449 799 170
Phone: (02) 9552 1707
Fax: (02) 9552 1709
Email:
 
Address:
235 Nelson Street,
ANNANDALE
NSW 2038
 
Facilities: Public testing service
Last Modified: 23-NOV-16


This facility complies with the requirements of ISO/IEC 17025:2005

13.28 Rubber and related products
.01 Sampling
by the methods of ISO 2859

.99 Other products
Tests on Male condoms for:
Determination of total lubricant to ISO 4074
Length, Width, Tensile, Freedom from holes, Bursting volume, Pressure
Packaging & Labelling to ISO 4074, ISO 23409, ASTM D3492, NZS 7104 and NZS 7106
Dry package seal (condoms) to in-house procedure UNFPA v3
Thickness to ISO 4074, ASTM D3492
Visible defects to ISO 4074
Package integrity to ISO 4074
Package and materials markings to WHO 2010 Specification
Leakage to ASTM D3492

Tests on Female condoms for:
Length, Width, Thickness, Burst Volume, Burst Pressure and
Leakage to ISO 25841, WHO Female condoms Guidelines 2012

Tests on Dams to AS 1683.12 and AS/NZS 4592 (excluding Section 4.1)

Tests on Examination gloves for:
Length, Width, Thickness, Tensile properties, Leakage, Residual Powder and
Cuff Rupture Resistance to ISO 11193, ISO 21171, ASTM D3578, ASTM D6124 AS/NZS 4011

Tests on Surgical gloves for:
Length, Width, Thickness, Tensile properties, Leakage, Residual Powder and
Cuff Rupture Resistance to ISO 10282, ISO 21171, ASTM D3577, AS/NZS 4179

Tests on Catheters for Dimensions, Packaging and Marking and Specific requirements - Type I and III (with or without balloon) to AS/NZS 2696:1996 (excluding Appendix B)

Tests on Tampons for, Applicator, Length, Absorptive Capacity, Water Repellence and Pull strength of withdrawal cord AS 2869 (excluding sections 5.4, 7.1 and 8)

Tests on Hot Water Bottles to -
BS 1970 (excluding ageing of hot water bottle samples)
Trade Practices (Consumer Product Safety Standard) (Hot water bottles) Regulations 2008
Fair Trading Amendment (Hot Water Bottles) Regulations 2009
for Visual examination, Thickness, Capacity Test, Tests for stoppers (Closures), Separation of screwed closures, Leakage Test, Pressure Test, Seam Test, Tear Strength, Tension set, Tensile Properties, Creep resistance for PVC hot water bottles, Percentage mass change for PVC hot water

13.29 Plastics and related products
.99 Other products
Tests on syringes for:
Gauging test to AS 1600.1, ISO 7886
Assembly of syringe barrel and reference conical fitting, liquid leakage, air leakage,
separation force, unscrewing torque, ease of assembly, resistance to overriding,
and stress cracking to AS 1600.2 and ISO 594
Barrel dimensions, dead space, air leakage past piston during aspiration,
liquid leakage past piston and fit of piston in barrel to AS 1094.1

Tests on hyperdermic needles to AS 1946 (excluding section 6)
Tests on IUD to ISO 7439 Clauses 5.2, 5.3, 5.4, 5.5, 7.2, 7.3, 7.4 only
Small-bore connectors for liquids and gases in health care applications to ISO 80369-20

13.50 Products for children and infants
.10 Toys
Tests on toys with compliance to Consumer Protection Notice 14:2003
using methods AS/NZS ISO 8124-1 clauses 4.1, 4.3.1, 4.3.2, 4.4, 4.5.1, 4.5.2, 4.5.4, 4.5.5, 4.25(a) (only), 5.1, 5.2, 5.3, 5.4, 5.5, 5.6, 5.21, 5.24.2, 5.24.3, 5.24.7