Back to Search Results


Address Details:
23/31 Wentworth Street
GREENACRE, NSW 2190
AUSTRALIA Map
www.auscal.com.au

Contact Details:
Mr Anthony Ainsworth (Jnr)
+61(02) 96426588

Availability:
Services available to external clients

SCOPE OF ACCREDITATION   View and Print Scope of Accreditation Printable version

Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.



ISO/IEC 17025 (2017)
Calibration
SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
Dimensional metrology - Engineering equipment and precision instruments
Micrometer setting gauges;
Length measurements;
Comparison with a reference standard;
CAPABILITY
with Calibration and Measurement Capability of -
1 in 105 or 1 μm (whichever is greater) up to 1 000 mm

Depth and height micrometers;
Length measurements;
Comparison with a reference standard;
Precision vernier height gauges including compliance to BS 1643
Depth micrometers including  compliance to BS 6468

Micrometer heads;
Length measurements;
Comparison with a reference standard;
Including compliance to AS 2328 and BS 1734

Electronic calipers; Vernier calipers;
Length measurements;
Comparison with a reference standard;
 including compliance to AS 1984; BS887; and JIS 7507
CAPABILITY
with Calibration and Measurement Capability of -
(10 + 0.025L) μm for indication errors where L is the scale value in mm up to 1.5m   



Dial gauges;
Length measurements;
Comparison with a reference standard;
Including compliance to  AS 2103

External micrometers;
Length measurements;
Comparison with a reference standard;
Up to 1 m including compliance to AS 2102 and BS 870
CAPABILITY

 

Straight edges;
Length measurements;
Comparison with a reference standard;
Including compliance to  AS 1003

Extensometers;
Length measurements;
Comparison with a reference standard;
Including compliance to AS 1545
CAPABILITY
with Calibration and Measurement Capability of -
(1 + 0.5 L) μm where L is the extension in mm

Vernier height and depth gauges;
Length measurements;
Comparison with a reference standard;
Precision vernier height gauges including compliance to  BS 1643

Precision spirit levels;
Length measurements;
Comparison with a reference standard;
Including compliance to  AS 2054

Internal micrometers;
Length measurements;
Comparison with a reference standard;
Up to 1 m including compliance to AS 2101 and BS 959
1 m

Surface plates;
Length measurements;
Comparison with a reference standard;
Including compliance to AS 1004

Feeler gauges;
Length measurements;
Comparison with a reference standard;
Including compliance to  AS 1655

Steel rulers and measuring tapes;
Length measurements;
Comparison with a reference standard;
Steel rules including compliance to BS 4372
CAPABILITY




Squares;
Length measurements;
Comparison with a reference standard;
Engineers squares, grades A and B, up to 1 m including compliance to BS 939
Dimensional metrology - Jigs, fixtures, cutting tools, machine tools, gears, splines and serrations
Components and QC standards;
Length measurements;
Comparison with a reference standard by differential measurement;
CAPABILITY
with Calibration and Measurement Capability of -
Linear measurements
5 in 10âμ or 5 μm (whichever is greater) up to 1 000 mm
Dimensional metrology - Length and angle standards
Extensometer calibrators;
Length measurements;
Comparison with a reference standard;
including compliance to AS 1545 and AS 2328

Gauge blocks and accessories;
Length measurements;
Comparison with a reference standard;
including  compliance to  AS 1457, Grades 1 and 2 for metric blocks and BS 4311 Grade 2 only for imperial blocks
Force metrology - Force measuring and testing equipment
Elastic force measuring devices;
Force in compression; Force in tension;
Comparison measurement with reference load cell;
Calibration of devices such as load measuring rings for soil testing machines in tension 
and compression at forces up to
500 kN to Class AA and 3.3 MN to Class A requirements of AS 2193
500 kN to Class AA and 3.3 MN to Class A requirements of AS 2193
including on site calibrations



Force metrology - Force measuring and testing equipment
Compression and universal machines in compression; Tension and universal machines in tension;
Force in compression; Force in tension;
Comparison measurement with reference load cell;
including on site calibrations



CAPABILITY
Including on site calibrations
with a Calibration and Measurement Capability of -
Tension and universal machines in tension
Calibration at forces up to 500 kN to Class AA and 3 MN to Class A requirements to AS 2193
0.17% of reading from 0.01N to 1000 kN
0.25% of reading from 1000 kN to 3 MN
Compression and universal machines in compression
Calibration at forces up to 500 kN to Class AA, 4.5 MN to Class A and Class B above 4.5 MN to 10 MN requirements of AS 2193
0.17% of reading from 0.01N to 500 kN
0.25% of reading from 500 kN to 10 MN
Force metrology - Force standards
Force calibrating equipment; Force standards and load cells used as force standards;
Force in compression; Force in tension;
Comparison measurement with reference load cell;
Calibration at forces up to 500 kN in tension and 2 MN in compression to -
Class 1 requirements of AS 2193 up to 500 kN in tension
Class 1 requirements of AS 2193 up to 500 kN in compression
Class 2 requirements of AS 2193 above 500 kN up to 2 MN in compression
Class 0.5 (up to 500 kN) and Class 1 requirements of ISO 376
500 kN in tension and 2 MN in compression
CAPABILITY
with Calibration and Measurement Capability of -
0.03% of reading or 0.14N (whichever is greater)  up to 2 MN

Force metrology - Hardness standards and equipment
Rockwell hardness machines;
Rockwell hardness;
Comparison with a reference standard;
Partial and complete calibration, except indenter dimensions and measuring apparatus, 
including compliance to AS 1815
including on site calibrations



Force metrology - Hardness standards and equipment
Brinell hardness machines;
Brinell hardness;
Comparison with a reference standard;
Brinell hardness machines
Partial and complete calibration including compliance to AS 1816 
Brinell hardness machines
from 39.2 N to 29.4 kN
including on site calibrations



Force metrology - Hardness standards and equipment
Dead weight rubber hardness testers;
Rubber hardness;
Comparison with a reference standard;
Rubber hardness tests (I.R.H.D.) on rubber products including liquid limit device bases for compliance
including compliance to AS 1683.15.1
including on site calibrations



Force metrology - Hardness standards and equipment
Dead weight rubber hardness testers;
Rubber hardness;
Direct force and length measurement;
Rubber hardness tests (I.R.H.D.) on rubber products including liquid limit device bases for compliance with AS 1683.15.1 and similar specifications
including on site calibrations



Force metrology - Hardness standards and equipment
Izod impact machines;
Izod impact;
Comparison with a reference standard;
Partial and complete calibration including compliance to  AS 1544
including on site calibrations



Force metrology - Hardness standards and equipment
Rubber hardness meters (durometers);
Rubber hardness;
Comparison with a reference standard;
Including compliance to AS 1683.15.2 and similar specifications
including on site calibrations



Force metrology - Hardness standards and equipment
Vickers micro-hardness machines;
Vickers hardness;
Comparison with a reference standard;
less than HV 0.2
Direct verification except indentor dimensions including compliance to  AS 1817
including on site calibrations



Force metrology - Hardness standards and equipment
Vickers low-load hardness machines;
Vickers hardness;
Comparison with a reference standard;
HV 0.2 to HV 5
Verification of forces  including compliance to AS 1817
9.8 N  to 49 N
including on site calibrations



Force metrology - Hardness standards and equipment
Resilience testing machines;
Resilience;
Comparison with a reference standard;
Calibration of rebound pendulum to DIN 53512 and similar specifications
including on site calibrations



Force metrology - Hardness standards and equipment
Charpy impact machines;
Charpy impact;
Comparison with a reference standard;
Charpy impact machines


Partial and complete calibration including compliance to AS 1544
including on site calibrations



Force metrology - Hardness standards and equipment
Rockwell superficial hardness machines;
Rockwell hardness;
Comparison with a reference standard;
Partial and complete calibration except depth measuring device including compliance to AS 2025
including on site calibrations



Force metrology - Hardness standards and equipment
Indenters; Portable Brinell measuring microscopes;
Length measurements;
Direct length measurement;
Portable Brinell measuring microscopes
with minimum scale intervals of 0.05 mm
Indenters for hardness machines
Visual examination
including on site calibrations



Force metrology - Hardness standards and equipment
Vickers hardness machines;
Vickers hardness;
Comparison with a reference standard;
Partial and complete calibration, except indenter dimensions, including compliance to AS 1817 
from 24.5 to 980 N
including on site calibrations




Hardness standards;
Rubber hardness;
Comparison with a reference standard;
Rubber hardness tests (I.R.H.D.) on rubber products including liquid limit device
bases including  compliance to AS 1683.15.1 and similar specifications
Mass - Determination of mass and calibration of weighing devices
Industrial weighing devices; Laboratory weighing devices; Precision laboratory balances;
Mass;
Gravimetric measurement against reference mass;
CAPABILITY
Including on site calibration
With Calibration and Measurement Capability of -
Precision laboratory balances
2 in 106 or 20 μg (whichever is greater);
Industrial balances
1 in 105 or 1 mg (whichever is greater);
Industrial weighing appliances
5 in 105 or 100 mg (whichever is greater)
Pressure metrology - Pressure and vacuum measuring equipment
Pressure control devices; Pressure gauges; Pressure recorders; Pressure transducers; Vacuum gauges;
Gauge pressure;
Comparison with dead weight tester; Comparison with reference instrument;
Calibration  to AS1349 and/or MSA test methods 1 and 2
including on site calibrations



CAPABILITY
with Calibration and Measurement Capability of -
0.05% of reading or 0.05 kPa (whichever is greater) from -100 kPa to 70 MPa

On site calibrations
0.46% from -10 kPa to -20 kPa and 10 kPa to 20 kPa
0.23% from -100 kPa to -20 kPa and 20 kPa to 70 MPa

Torque - Torque measuring and testing equipment
Torque transducers; Torque wrenches;
Torque;
Comparison with a reference standard;
Transducers to test method CP035a-1
CAPABILITY
with Calibration and Measurement Capability of -
0.2% up to 1500 N.m;
0.5% above 1500 N.m up to 18000 N.m