Back to Search Results


Address Details:
Unit 14/121 Kerry Road
ARCHERFIELD, QLD 4108
AUSTRALIA Map
www.lmats.com.au

Contact Details:
Mr Joseph Turrell
+61(07) 38752070

Availability:
Services available to external clients

SCOPE OF ACCREDITATION   View and Print Scope of Accreditation Printable version

Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.


  • ISO/IEC 17025 (2005)
    Infrastructure and Asset Integrity
  • SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
    Evaluation of mechanical performance of pressure plant, pipelines and equipment
    Piping; Pressure fittings; Valves;
    Hydrostatic pressure; Leakage;
    Not applicable;
    AS 1579 Appendix F,
    AS 1631 section 9,
    AS 2885.5 section 7.8 (Type 1),
    AS 2885.5 section 7.9 (Type A),
    AS 4037 section 17,
    ASME B31.3 section 345.4
    up to 40 MPa 


    Above ground and exposed pipe sections



    Metallic storage vessels; Pressure vessels;
    Hydrostatic pressure;
    Not applicable;
    AS 1210 Section 5.10, 
    AS 1228 Section 5.4, 
    AS 4037 Section 17 
    up to 40 MPa 


  • ISO/IEC 17025 (2005)
    Manufactured Goods
  • SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
    Material performance evaluation of metal products
    Reinforcing bar and steel prestressing materials for concrete;
    Bending properties; Geometric properties; Tensile properties;
    Indentation geometry; Longitudinal guided bend; Longitudinal tensile; Rib geometry;
    AS/NZS 4671 (excluding mass per unit length)
    5 kN to 1000 kN

    Fixtures and components;
    Tensile properties;
    Longitudinal tensile; Transverse tensile;
    AS 1391, 
    ASTM A370
    1 kN to 1000 kN

    Tubing/piping;
    Bending properties; Flattening properties; Shear strength;
    Longitudinal guided bend; Transverse guided bend;
    AS 1074,
    AS 1163,
    AS 2505.3,
    ASTM A370,
    ASTM A450

    Welded test specimens;
    Shear strength;
    Longitudinal tensile;
    AS 1554.3,
    AS 2205.8.1,
    AS 2205.8.2,
    ASME Section IX QW 196.2.1,
    ASTM A370,
    AWS D1.1,
    ISO 14323


    Nick-break fracture;
    Macroscopic examination; Visual examination;
    AS 2205.4.1,
    ASME Section IX,
    AWS D1.1,
    ISO 9017


    Macroscopic examination;
    Macroscopic examination;
    AS 1554.3,
    AS 2505.5.1,
    ASME Section IX,
    AWS D1.1,
    ISO 17639


    Fillet-break fracture;
    Macroscopic examination; Visual examination;
    AS 2205.4.2,
    ASME Section IX,
    AWS D1.1,
    ISO 9017

    Prepared metallic test specimens;
    Compression;
    Not applicable;
    API 5L,
    ASTM E9,
    DNV.2 Chapter 1
    5 kN to 1000 kN 

    Prepared metallic test specimens; Welded test specimens;
    Bending properties;
    Longitudinal guided bend; Transverse guided bend;
    AS 1554.3,
    AS 2505.1,
    AS 2505.2,
    AS 2205.3.1,
    AS 2205.3.2,
    AS 2205.3.3,
    ASME Section IX,
    ASTM A370,
    AWS D1.1,
    ISO 5173


    Impact resistance;
    Charpy V-notch (impact value);
    AS 1544.2,
    AS 2205.7.1,
    API 5L,
    DNV.2 Chapter 1,
    ISO 9016
    from -80°C to 100°C and at -196°C


    Hardness;
    Brinell; Rockwell - Scale B; Rockwell - Scale C;
    AS 1815.1,
    AS 1816.1,
    AS 1817.1,
    AS 2205.6.1,
    ASME IX,
    ASTM A370,
    ASTM E10,
    ASTM E18,
    ISO 6507-1,
    ISO 6508-1,
    ISO 9015-1,
    ISO 9015-2
    Vickers: HV5, HV10, HV30
    Brinell: HB10


    Tensile properties;
    All-weld-metal tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse joggle-butt tensile; Transverse tensile;
    AS 1391,
    AS 1554.3,
    AS 2205.2.1,
    AS 2205.2.2,
    AS 2205.2.3,
    ASTM A370,
    ASTM E8,
    ASTM E10,
    DNV.2 Chapter 1,
    ISO 4136,
    ISO 5178,
    ISO 6892-1,
    ISO 9018
    5 kN to 1000 kN

  • ISO/IEC 17025 (2005)
    Materials
  • SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
    Analysis of metals and alloys
    Chromium and chromium alloys; High alloy steels; Nickel and nickel alloys;
    Comparative indication of material grade and alloy type;
    Portable X-ray fluorescence equipment;
    in-house method TP-CT-04 UNS# A13840, A95083, A96063, C36000, C62700, C71300, C83600, G41400, G43400, G86200, N06002, N09901, R30605, R30816, S17400, S30300, S30400, S31254, S31600, S31700, S32100, S32205, S32550, S43100, T20813