Back to Search Results


Address Details:
26A McKinnon Road
PINELANDS, NT 829
AUSTRALIA Map
www.fcsnt.com.au

Contact Details:
Mr James Ritchie
+61(08) 89474700

Availability:
Services available to external clients

SCOPE OF ACCREDITATION   View and Print Scope of Accreditation Printable version

Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.


  • ISO/IEC 17025 (2005) - The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
    Calibration
  • SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
    Flow metrology - Flow measuring devices and systems
    Liquid meters;
    Flow rate; Volume (and nominal flow rate);
    Comparison with a reference meter; To be determined;
    including stating compliance with the specifications in the National Measurement Institute Test Procedure NITP 5.1 & 5.2
    flow meters for water and liquid hydrocarbons other than LPG
    at flow rates in the range 6 L/min to 3800 L/min
    20 L to 200 L test volume 
    Including on site calibrations



    CAPABILITY
    Including on site calibrations
    With Calibration ans Measurement Capability of-
    0.1% of volume with a minimum 20 L test volume by the volumetric method using a reference volume measure
    0.1% of volume with a minimum 200 L test volume by the volumetric method using a master meter
    at flow rates in the range 6 L/min to 3800 L/min
    Pressure metrology - Pressure and vacuum measuring equipment
    Pressure gauges; Pressure recorders; Vacuum gauges;
    Gauge pressure;
    By pressure calibrator;
    MSA Test Method 1 for digital gauges ;
    MSA Method 2 for mechanical gauges 
    -95 kPa to 2000 kPa (pneumatic measurement)
    100 kPa to 120 MPa (hydraulic measurement)
    100 kPa to 60 MPa (oil-free hydraulic measurement)
    CAPABILITY
    With Calibration and Measurement Capability of-
    0.06% of reading or 0.2 kPa (whichever is greater) from -95 kPa to 2000 kPa (pneumatic measurement)
    0.06% of reading or 0.5 kPa (whichever is greater) from 100 kPa to 120 MPa (hydraulic measurement)
    0.06% of reading or 0.5 kPa (whichever is greater) from 100 kPa to 60 MPa (oil-free hydraulic measurement)
    Torque - Torque measuring and testing equipment
    Torque wrenches;
    Torque;
    Comparison with a reference standard;
    including compliance with BS EN ISO 6789
    0.5 Nm to 1500 Nm
    CAPABILITY
    With Calibration and Measurement Capability of-
    1.0 % of reading from 0.5 Nm to 1500 Nm

  • ISO/IEC 17025 (2005)
    Infrastructure and Asset Integrity
  • SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
    Evaluation of mechanical performance of pressure plant, pipelines and equipment
    Hose and hose assemblies; Piping; Pressure fittings; Valves;
    Conductivity; Hydrostatic pressure;
    Not applicable;
    AS 1180.5 Sections 7.1, 7.2; 
    AS 1180.13A kinds 1 and 2 only; 
    AS 1180.13B kinds 1 and 2 only; 
    AS 1271 Section 2.6 and 3.6 (except lift and discharge capacity);
    AS 2117 Sections 2.1, 2.2, 2.6.1, 2.6.2; 
    AS 2683 Sections 2.1, 2.5; 
    AS 2792 Section 3.1.2 and Appendix E up to 105 MPa;
    AS 4037 Sections 17, 19; 
    AS 4041 Sections 6.6, 6.7
    up to 280 MPa