Back to Search Results

LMATS Pty Ltd

SYDNEY MATERIALS TESTING LABORATORY
| ACCREDITATION NUMBER: 15840 | SITE NUMBER: 21094 |

Address Details:
Unit 1C
137 - 139 Silverwater Road
SILVERWATER, NSW 2128
AUSTRALIA Map
www.lmats.com.au
Contact Details:
Mr Alireza Hedayati
+61(02) 96481989

Availability:
Services available to external clients
SCOPE OF ACCREDITATION   View and Print Scope of Accreditation Printable version

Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

  • ISO/IEC 17025 (2005)
    Infrastructure and Asset Integrity
    • SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
    Evaluation of mechanical performance of pressure plant, pipelines and equipment
    		Piping; Pressure fittings; Valves;
    		Hydrostatic pressure; Leakage;
    		Not applicable;
    		AS 1579 Appendix F, AS 1631 Section 9, AS 4037 Section 17, ASME B31.3 Section 345.4; AS 2885.5 Sections 7.8 and 7.9
     
    		 Up to 40 MPa

    		Above ground piping (Type 1) (Type A) and exposed pipe sections



    		Metallic storage vessels; Pressure vessels;
    		Hydrostatic pressure;
    		Not applicable;
    		AS 4037 Section 17 
    		 up to 40 MPa

  • ISO/IEC 17025 (2005)
    Manufactured Goods
    • SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
    Evaluation of access protection products
    		Edge protection (including guardrails and guard rail posts);
    		Load;
    		Not applicable;
    		AS 1657 Appendix B 


    		Proof load tests

    Material performance evaluation of metal products
    		Reinforcing bar and steel prestressing materials for concrete;
    		Tensile properties;
    		Longitudinal tensile;
    		AS/NZS 4671 Clause 7.2.2 and Appendix C2.2
    		 10 kN to 1000 kN


    		Geometric properties;
    		Mass per unit length;
    		AS/NZS 4671 Appendix C3.3


    		Bending properties;
    		Simple bend;
    		AS/NZS 4671 Clause 7.2.3


    		Geometric properties;
    		Indentation geometry; Rib geometry;
    		AS/NZS 4671 Appendices C3.1.4 and 3.2.4

    		Tubing/piping;
    		Bending properties; Flattening properties; Shear strength;
    		Not applicable;
    		AS 2505.3, ASTM A450

    		Welded test specimens;
    		Bending properties; Compression; Flattening properties; Shear modulus; Shear strength;
    		Not applicable;
    		 AS 2205.8.1, AS 2205.8.2; ISO 15630-2; ISO 14323; ISO 12996, ASME IX QW 196.2.1;
    		 Compression - 10 kN to 1000 kN


    		Bending properties;
    		Longitudinal guided bend; Transverse guided bend;
    		 AS 2205.3.1, AS 2205.3.2, AS 2205.3.3, AS 3992 Section 13.3, ASME IX QW160, AWS D1.1 Section 4, AWS D1.6 Section 4, ISO 5173


    		Macroscopic examination;
    		Macroscopic examination;
    		AS 2205.5.1, ISO 17639, ASME IX QW 183, ASME IX QW 184, AWS D1.1 Clause 4, AWS D1.6 Clause 4 


    		Fillet-break fracture;
    		Macroscopic examination; Visual examination;
    		AS 2205.4.2, AWS D1.1 Section 4, ASME Section IX QW 182, AWS D1.6 Section 4, ISO 9017


    		Nick-break fracture;
    		Macroscopic examination; Visual examination;
    		AS 2205.4.1, ISO 9017 

    		Prepared metallic test specimens; Welded test specimens;
    		Tensile properties;
    		All-weld-metal tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile;
    		AS 1391, ASTM A370, ASTM E8,ISO 6892-1,AS 2205.2, ISO 4136, ISO 5178, ISO 9018, AS 3992 Section 13.2, ASME IX QW150 and QB150, AWS D1.1 Section 4 and AWS D1.6 Section 4


    		 10 kN to 1000 kN 


    		Impact resistance;
    		Charpy V-notch (impact value);
    		AS 1544.2; ASTM A370; ASTM E23; ISO 148-1, AS 2205.7.1
    		 Temperature range - ambient down to -70°C and at -196°C


    		Hardness;
    		Brinell; Rockwell - Scale B; Rockwell - Scale C; Vickers;
    		AS 1816.1; ASTM A370; ASTM E10; ISO 6506-1;AS 1815.1; ASTM E18; ISO 6508.1;AS 1817.1; ISO 9015-2; ISO 6507-1;ASTM E384
    AS 2205.6.1, ISO 9015-1
    		 Rockwell B & C Scales; Brinell 4.9 to 29.4 kN including tests at 29.4 kN using portable hardness testers; Vickers 9.8 N to 490 N 

  • ISO/IEC 17025 (2005)
    Materials
    • SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
    Metallic corrosion evaluation
    		Copper and copper alloys;
    		Stress corrosion resistance;
    		Mercurious nitrate;
    		AS 2136 and ASTM B154 

    		Austenitic, duplex and nickel-chromium alloys;
    		Detrimental intermetallic phase;
    		Charpy V-notch (impact value); Sodium hydroxide etch test;
    		ASTM A923 Methods A,B


    		Intergranular attack or end grain pitting on metals caused by aircraft chemical processes; Intergranular corrosion resistance;
    		Acidified copper sulfate exposure (Mony-Penny-Strauss); Copper - copper sulfate - 50% sulfuric acid; Copper - copper sulfate - sulfuric acid; Ferric sulfate - Sulfuric acid; Mixed acid-oxidising salt; Nitric acid; Nitric acid exposure (Huey); Oxalic acid etch;
    		AS 2038 Section 6,Section 7; AS 2205.10.1;  ASTM A262 Practices A,B,C,E, ASTM G28 Methods A and B; ASTM F2111


    		Pitting corrosion resistance;
    		Critical crevice temperature; Critical pitting temperature;
    		ASTM G48 Method A
    Metallographic evaluation of metals and alloys
    		Austenitic, duplex and nickel-chromium alloys;
    		Detection of iron on passivated steel (contamination test);
    		Copper sulfate; Potassium ferricyanide nitric acid;
    		ASTM A380 Clauses 7.2.5.3 and 7.3.4, ASTM A967 Practices D and E

    		Austenitic, duplex and nickel-chromium alloys; Magnesium alloys; Nickel and nickel alloys; Titanium and titanium alloys;
    		Phase identification and proportion;
    		Microscopic examination; Point count;
    		 ASTM E562

    		Ferrous materials;
    		Case depth and depth of decarburisation;
    		Hardness traverse; Macroscopic examination; Microscopic examination;
    		AS 1982 Section 6.1, ISO 2639, ISO 3754, SAE J423, 


    		Graphite type and distribution in cast irons;
    		Microscopic examination;
    		ISO 945, ASTM A247