Back to Search Results

LMATS Pty Ltd

MELBOURNE MECHANICAL TESTING LABORATORY
| ACCREDITATION NUMBER: 15840 | SITE NUMBER: 17127 |

Address Details:
6 Techno Park Drive
WILLIAMSTOWN, VIC 3016
AUSTRALIA Map
www.lmats.com.au
Contact Details:
Mr Raghavendra Katwe
+61(03) 93999199

Availability:
Services available to external clients
SCOPE OF ACCREDITATION   View and Print Scope of Accreditation Printable version

Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

  • ISO/IEC 17025 (2005)
    Infrastructure and Asset Integrity
    • SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
    Evaluation of mechanical performance of pressure plant, pipelines and equipment
    		Piping; Pressure fittings; Valves;
    		Hydrostatic pressure; Leakage;
    		Not applicable;
    		AS 1579 Appendix F, AS 1631 Section 9, AS 2885.5 Section 7.8 (Type 1), AS 4037 Section 17, ASME B31.3 Section 345.4, AS 2885.5 Section 7.9
     
    		 up to 50 MPa

    		Above ground and exposed pipe sections



    		Metallic storage vessels; Pressure vessels;
    		Hydrostatic pressure;
    		Not applicable;
    		AS 4037 Section 17 
    		 up to 50 MPa

  • ISO/IEC 17025 (2005)
    Manufactured Goods
    • SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
    Evaluation of access protection products
    		Edge protection (including guardrails and guard rail posts);
    		Deflection; Rigidity; Strength;
    		Not applicable;
    		AS 1657 Section 6.1.2, Appendices B and C
    Material performance evaluation of elastomers, plastics and composite products
    		Pipe material and related products;
    		Peel strength; Tensile properties;
    		Tensile tests with load stress and cross-head control;
    		ISO 13953
    ISO 13954

    		Butt joints


    Material performance evaluation of metal products
    		Reinforcing bar and steel prestressing materials for concrete;
    		Bending properties;
    		Simple bend;
    		AS/NZS 4671 clause 7.2.3


    		Geometric properties;
    		Indentation geometry; Mass per unit length; Rib geometry;
    		AS 4671 Appendices C 3.1, C 3.2, C 3.3


    		Tensile properties;
    		Longitudinal tensile;
    		AS/NZS 4671 Clause 7.2.2; Appendix C2.2

    		Fixtures and components;
    		Tensile properties;
    		Not applicable;
    		LMATS in-house procedure TP-ME-02
    		 500 N to 500 kN

    		Tubing/piping;
    		Bending properties; Flattening properties; Shear strength;
    		Not applicable;
    		AS/NZS 1163 Section 10, AS 2505.3, ASTM A370

    		Wire, wire strands and coated wire products;
    		Bending properties;
    		Reverse bend; Simple bend;
    		AS 2505.2, AS2505.4


    		Wrapping;
    		Not applicable;
    		AS 2505.6, ASTM A370


    		Tensile properties;
    		Cord breaking strength of conveyor wire; Longitudinal tensile;
    		 AS 1391, ASTM A370, ASTM E8, ISO 6892.1

    		Threaded fasteners, bolts and nuts;
    		Tensile properties;
    		Not applicable;
    		 AS 1391,AS 4291.1, AS 4291.2
    		 500 N to 500 kN

    		Welded test specimens;
    		Nick-break fracture;
    		Macroscopic examination; Visual examination;
    		AS 2205.4.1, ISO 9017 

    		Welded test specimens;
    		Macroscopic examination;
    		Visual examination;
    		AS 3992 Section 13.5

    		Brazed specimens




    		Shear strength;
    		Tensile tests with load stress and cross-head control;
    		 AS 2205.8.1, AS 2205.8.2, ISO 15630-2 


    		Peel strength;
    		Not applicable;
    		AS 3992 Section 13.4, ASME IX QB170


    		Torque on stud welds;
    		Not applicable;
    		ASME IX QW 192


    		Macroscopic examination;
    		Macroscopic examination;
    		AS 2205.5.1, ISO 17639


    		Cracking;
    		Hot cracking;
    		AS 2205.9.1


    		Fillet-break fracture;
    		Macroscopic examination; Visual examination;
    		AS 2205.4.2, AWS D1.1 Section 4, ASME Section IX QW 160, AWS D1.6 Section 4, ISO 9017

    		Prepared metallic test specimens; Tubing/piping;
    		Bending properties; Compression; Flattening properties; Shear modulus; Shear strength;
    		Not applicable;
    		LMATS in-house procedure TPME-03, AS/NZS 1163 Section 10; AS 2505.3; ASTM A370
    		 Compression - 500 N to 500 kN

    		Prepared metallic test specimens; Welded test specimens;
    		Charpy impact toughness;
    		Charpy (lateral expansion); Charpy V-notch (impact value);
    		AS 1544.2; ISO 148-1, AS 2205.7.1
    		 Temperature range - ambient down to -70°C and at -196°C


    		Tensile properties;
    		All-weld-metal tensile; Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; Uniaxial tension;
    		AS 1391, ASTM A370, ASTM E8,ISO 6892-1,AS 2205.2, ISO 4136, ISO 5178, ISO 9018, AS 3992 Section 13.2, ASME IX QW150 and QB150, AWS D1.1 Section 4 and AWS D1.6 Section 4


    		 500 N to 500 kN 


    		Hardness;
    		Brinell; Rockwell - Scale B; Rockwell - Scale C; Vickers;
    		AS 1816.1; ASTM A370; ASTM E10; ISO 6506-1;AS 1815.1; ASTM E18; ASTM E384; ISO 6508.1;AS 1817.1; ISO 9015-1; ISO 9015-2; ISO 6507-1; AS 2205.6.1
    		 Brinell 4.9 to 29.4 kN including tests at 29.4 kN using portable hardness testers; Vickers 9.8 N to 490 N and Vickers microhardness up to 9.8 N


    		Bending properties;
    		Longitudinal guided bend; Transverse guided bend;
    		AS 2505.1; AS 2205.2; AS 2205.5, ASTM A370, AS 2205.3.1, AS 2205.3.2, AS 2205.3.3, AS 3992 Section 13.3, ASME IX QW160, AWS D1.1 Section 4, AWS D1.6 Section 4,
     ISO 5173
    Material performance evaluation of paint and related products
    		Architectural coatings; Automotive coatings; Decorative coatings; Industrial coatings; Marine coatings;
    		Degree of cure;
    		Barcol hardness impressor;
    		AS 3894.4 Method D


    		Hot water immersion;
    		Not applicable;
    		AS 4822 Appendix F


    		Ductility;
    		Not applicable;
    		AS 1580.402.1


    		Residual contaminants - Chlorides; Residual contaminants - Oil or water droplet contamination; Residual contaminants - Presence of mill scale; Residual contaminants - Soluble salts of iron; Residual contaminants - Surface dust;
    		Not applicable;
    		AS 3894.6, Methods A, E

  • ISO/IEC 17025 (2005)
    Materials
    • SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
    Material performance evaluation of refractories, ceramics and related materials
    		Silicate glasses;
    		Microhardness of glass beads;
    		Not applicable;
    		ASTM E 384
    		 up to 9.8 N
    Metallic corrosion evaluation
    		Copper and copper alloys;
    		Dezincification resistance;
    		Classical;
    		AS 2345


    		Stress corrosion resistance;
    		Mercurious nitrate;
    		AS 2136 and ASTM B154 

    		Austenitic, duplex and nickel-chromium alloys;
    		Intergranular attack or end grain pitting on metals caused by aircraft chemical processes; Intergranular corrosion resistance;
    		Acidified copper sulfate exposure (Mony-Penny-Strauss); Copper - copper sulfate - sulfuric acid; Ferric sulfate - Sulfuric acid; Nitric acid; Nitric acid exposure (Huey); Oxalic acid etch;
    		AS 2038 Section 6,Section 7; AS 2205.10.1;  ASTM A262 Practices A,B,C,E, ASTM G28 Method A; ASTM F2111 Sections 7.4, 7.5, 7.6


    		Pitting corrosion resistance;
    		Ferric chloride pitting;
    		ASTM G48 Method A


    		Detrimental intermetallic phase;
    		Charpy V-notch (impact value); Ferric chloride corrosion test; Sodium hydroxide etch test;
    		ASTM A923 Methods A,B,C

    		Chemical corrosion treatment materials;
    		Adhesion;
    		Not applicable;
    		AS 3894.9 Methods A, B, C, ASTM D3359 Methods A, B

    		Chemical corrosion treatment materials; Plating;
    		Coating thickness;
    		Microscopic examination;
    		AS 2331.1.1, AS 1214 Appendix A; ASTM B487


    		Coating mass;
    		Dissolution - Strip, weigh and analytical;
    		AS 1627.6 Appendix B4


    		Coating mass;
    		Dissolution - Strip, weigh and analytical;
    		AS 2331.2.1,AS 4680 Appendix G2
    Metallographic evaluation of metals and alloys
    		Aluminium and aluminium alloys;
    		Phase identification and proportion;
    		Microscopic examination;
    		ASTM E562


    		Anodising thickness;
    		Not applicable;
    		AS 1231 Section 7.2, ASTM B487, ISO 1463


    		Depth of cladding;
    		Microscopic examination;
    		ASTM B487


    		Depth of surface defects;
    		Microscopic examination;
    		ASTM E3


    		Grain size;
    		Microscopic examination;
    		AS 1733, ASTM E112, ISO 643

    		Copper and copper alloys;
    		Phase identification and proportion;
    		Microscopic examination;
    		ASTM E562


    		Depth of surface defects;
    		Microscopic examination;
    		ASTM E3


    		Grain size;
    		Microscopic examination;
    		AS 1733, ASTM E112, ISO 643

    		Austenitic, duplex and nickel-chromium alloys; Magnesium alloys; Nickel and nickel alloys; Titanium and titanium alloys;
    		Grain size;
    		Microscopic examination;
    		AS 1733, ASTM E112, ISO 643


    		Depth of surface defects;
    		Microscopic examination;
    		ASTM E3


    		Phase identification and proportion;
    		Microscopic examination;
    		 ASTM E562

    		Ferrous materials;
    		Grain size;
    		Microscopic examination;
    		AS 1733, ASTM E112, ISO 643


    		Non-metallic inclusion content;
    		Microscopic examination;
    		AS 2197


    		Case depth and depth of decarburisation;
    		Hardness traverse; Macroscopic examination; Microscopic examination;
    		AS 1982 Sections 6.1, 6.2, 6.3, AS 2003 Sections 6.1, 6.2, ASTM F2328, ISO 2639, ISO 3754, SAE J423, 


    		Embrittlement;
    		Not applicable;
    		ASTM A143


    		Phase identification and proportion;
    		Microscopic examination;
    		ASTM E562


    		Detection of iron on passivated steel (contamination test);
    		Copper sulfate; Potassium ferricyanide nitric acid;
    		ASTM A380 Sections 7.2.5.3 and 7.3.4, ASTM A967 Practices D and E


    		Depth of surface defects;
    		Microscopic examination;
    		ASTM E3


    		Graphite type and distribution in cast irons;
    		Microscopic examination;
    		ISO 945


    		Non-metallic inclusion content;
    		Macroscopic examination; Microscopic examination;
    		AS 2087, ASTM E45 Section 5.1.3