| SERVICE | PRODUCT | DETERMINANT | TECHNIQUE | PROCEDURE | LIMITATION / RANGE |
Evaluation of access protection products
| Balustrades; Edge protection (including guardrails and guard rail posts);
| Static load;
| Not applicable;
| In-house TP 3.7 for the purpose of determining compliance with AS/NZS 1170.1 Section 3.6
| |
|
| Fencing and gates designed for temporary installation;
| Dynamic load; Foothold aperture; Impact resistance; Simulated climbing evaluation; Wind force overturning evaluation;
| Not applicable;
| In-house TP 3.7, In-house TP 5.3,
AS 4687 Sections 4, 4.3 | |
|
| Edge protection (including guardrails and guard rail posts);
| Rigidity; Static load; Strength;
| Not applicable;
| In-house TP 3.7
AS 1657 Appendices B, C and D
| |
| including stairways
|
|
| | |
|
|
| Dynamic load; Static load;
| Not applicable;
| In-house TP 3.7, In-house TP 5.3,
AS/NZS 4994.1 Appendices A, B, C, D, E | |
|
| Fencing and gates designed for fixed installation;
| Dynamic load; Rigidity; Strength;
| Not applicable;
| In-house TP 3.7, In-house TP 5.3,
AS 1926.1 Appendices B, C, D, E | |
| Safety barriers and gate units for swimming pools
|
|
| | |
|
Material performance evaluation of metal products
| Reinforcing bar and steel prestressing materials for concrete;
| Tensile properties;
| Longitudinal tensile;
| In-house method TP 2.17,
AS/NZS 4672.1 Section 5.5,
AS 1391,
ISO 15630-3 Section 5
| 0.2 kN to 3000 kN
|
|
| Fixtures and components;
| Tensile properties;
| Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse tensile;
| AS 1391,
ASTM A370, ASTM E8M,
ISO 6892-1,
in-house method TP 2.2
| 0.2 kN to 3000 kN
|
|
| Threaded fasteners, bolts and nuts;
| Hardness;
| Rockwell - Scale C; Vickers;
| In-house method TP 1.6, In-house method TP 1.7,
AS 4291.1
| |
| Structural bolts
| Surface hardness
|
| | |
|
|
| Tension;
| Longitudinal tensile;
| in-house method TP 2.4, in-house method TP 2.5, in-house method TP 2.11,
AS 4291.1,ASTM F606,SAE J429,ISO 3506.1, ISO 898-1,ASTM F606,
| 0.2 kN to 3000 kN,
|
|
| wedge tensile tests of bolts; full size axial tensile tests
|
| | |
|
|
| Proof load;
| Not applicable;
| in-house method TP 2.3, in-house method TP 3.2,
AS 4291.1,AS/NZS 2465, AS/NZS 4291.2,
ISO 898-1,SAE J429,ASTM A370, ASTM F593, ASTM F606
| 0.2 kN to 3000 kN
|
|
| Welded test specimens;
| Tensile properties;
| All-weld-metal tensile; Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile;
| in-house method TP2.8, in-house method TP 2.9,
AS 1391, AS 2205.2.1, AS 2205.2.2,
AS/NZS 3992,
ASME IX,
ASTM E8M,
AWS D1.1
| 0.2 kN to 3000 kN
|
|
|
| Bending properties;
| Longitudinal guided bend; Slow bend on rail sections; Transverse guided bend;
| in-house method TP 4.1, in-house method 4.4,
AS 2205.3.1, AS 2205.3.3, AS 1085.20 Appendix K,
AS/NZS 3992, ASME IX, ISO/EN 5173
| |
|
|
| Fillet-break fracture;
| Macroscopic examination; Visual examination;
| in-house method TP 8.2,
AS 1665, AS 2205.4.2,
ASME IX
| |
|
|
| Hardness;
| Vickers;
| in-house methods TP 1.4 and TP 1.10,
AS: 1817.1, AS 2205.6.1, AS 1085.20 Appendices G2 and G3,
NACE MR0175,
ISO 15156-1
| Vickers - Hardness range 2.94 N to 294 N
|
|
| weld macro hardness surveys
|
| | |
|
|
| Impact resistance;
| Charpy (assessment of fracture appearance); Charpy (lateral expansion); Charpy V-notch (impact value);
| in-house method TP 5.1,
AS 1544.2, AS 2205.7.1,
ISO 148-1,
ASTM E23,
ASTM A370,
Lateral expansion -
in-house method TP 5.2,
AS 1544.5,
ASTM A370,
ISO 148-1,
| from ambient temperature to -100°C and at -196°C
|
|
|
| Nick-break fracture;
| Macroscopic examination; Visual examination;
| in-house method TP 8.3,
AS 1665; AS 2205.4.1
| |
|
|
| Macroscopic examination;
| Macroscopic examination;
| in-house method TP 8.1,
AS 2205.5.1, AS 1085.20 Appendix H,
AS/NZS 1554, AS/NZS 3992,
AWS D1.1,
ASME IX
| |
|
| Prepared metallic test specimens;
| Hardness;
| Brinell;
| in-house method TP 1.10,
AS 1816.1,
ASTM E10,
| tests to 29.4 kN
|
|
|
| Bending properties;
| Longitudinal guided bend; Transverse guided bend;
| in-house method TP 4.1,
AS 2205.3.1, AS 2205.3.3,
AS/NZS 3992,
ASME IX,
ISO/EN 5173
| |
|
|
| Tensile properties;
| Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse tensile;
| AS 1391, ASTM A370, ASTM E8M, ASTM F606
ISO 6892-1 in-house method TP 2.1
| 0.2 kN to 3000 kN
|
|
|
| Hardness;
| Rockwell - Scale A; Rockwell - Scale B; Rockwell - Scale C;
| in-house method TP 1.2,
AS 1815.1,
ASTM E18,
ISO 6508-1
|
|
|
|
| Impact resistance;
| Charpy (assessment of fracture appearance); Charpy (lateral expansion); Charpy V-notch (impact value);
| in-house method TP 5.1,
AS 1544.2,
ISO 148-1,
ASTM E23,
ASTM A370,
Lateral expansion -
in-house method TP 5.2,
AS 1544.5,
ASTM A370,
ISO 148-1
| from ambient temperature
to -100°C and at -196°C
|
|
|
| Compression; Shear strength;
| Not applicable;
| in-house method TP 3.1
| 0.2 kN to 3000 kN
|
|
|
| Hardness;
| Vickers;
| in-house method TP 1.1,
AS 1817.1,
ASTM E384,
ISO 6507-1
| 2.94 N to 294 N
|
|
Mechanical performance evaluation of ladders, racks, scaffolds and supports
| Scaffolding and scaffolding components;
| Coefficient of friction; Stiffness; Strength;
| Not applicable;
| In-house method TP 3.4 and AS/NZS 1577 Sections 3,4,5,6 Appendices A, B, C and D (scaffolding planks and decking components);
In-house method TP 3.11 and AS 1576.3 Appendices A, B, C, D, E, F, G and H (scaffolds);
In-house method TP 3.12; AS 1576.1 Appendices A, B, C, D, E, F, G, H, I, J, K, L, M and N and AS 1576.2 Appendices A, B, C, D, E, F, G, H, I, J, K, L, M and N (scaffold fittings)
| |
|
| Sliding; Static load; Dynamic load
|
| | |
|
Printable version