Back to Search Results

Address Details:
Victorian Technology Centre
275-283 Normanby Road

Contact Details:
Mr Benjamin Smith
+61(03) 96479700

Services available to external clients

SCOPE OF ACCREDITATION   View and Print Scope of Accreditation Printable version

Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity
Evaluation of air control equipment
Air delivery; Air flow; Fan speed and power;
Not applicable;
Air delivery, fan speed and power of electric circulating fans for household and similar use, excluding ceiling-type fans, to AS 2071-1984
Air flow measurement of fans and blowers using ASHRAE 51-75 nozzles, pitot tubes
Air flow measurement of gas fired ducted air heaters using ASHRAE 51-75 nozzles to AS 4556 and AG 106 (M.O.T.5.13.1-96)
BS 848 Part 1
ISO 5801
Air flow measurements with least uncertainties of measurement of -
6% from 0.01 to 1.0 m³/s using orifice plates;
4% from 0.05 to 1.0 m³/s using ASHRAE 51-75 nozzles;
10% from 2 to 5 m³/s using pitot tubes;
4% from 5 to 50 m³/s using pitot tubes;
10% from 0.2 to 2 m³/s using hot-wire anemometers;
5% from 2 to 10 m³/s using hot-wire anemometers;
20% from 0.2 to 20 m³/s using vane anemometers

Air conditioning and ventilation systems;
Air flow;
Not applicable;
ISO 5219
ISO 7730
AS 4740
ARI 650
BS 4797 Part 1

Cyclic test; Dynamic closure; Leakage; Operation; Temperature degradation;
Not applicable;
UL 555
BS EN 1751
ISO 10294
AS 1682.1
 SS 333
Evaluation of mechanical performance of pressure plant, pipelines and equipment
Pneumatic pressure;
Not applicable;
AS/NZS 4129 Section 2.4.2 and AS/NZS 4130 Appendix F

ISO/IEC 17025 (2017)
Manufactured Goods
Mechanical performance evaluation of components for building envelopes, framing and interior lining
Door, window and skylight assemblies;
Air infiltration; Deflection; Operating force; Proof load; Strength at ultimate limit state loading; Structural performance evaluation; Water penetration resistance;
Cyclic pressure; Static pressure;
including on-site tests to
AS/NZS 4420.1;
AS 2047 Section 2

Facade assemblies including interior and exterior cladding systems;
Air infiltration; Deflection; Proof load; Strength at ultimate limit state loading; Structural performance evaluation; Water penetration resistance;
Cyclic pressure; Static pressure;
including on-site tests to 
AS/NZS 4284 Sections 8.2, 8.3, 8.4, 8.5, 8.6, 8.8 and Appendices C, D, E (CSIRO SIROWET procedure);
 NCC Building Code of Australia (Volume 1, Section FV1 and Volume 2, Section V2.2.1)

Facade assemblies including interior and exterior cladding systems; Wall, floor and ceiling panels;
Water penetration resistance;
Field check - Spray;
including on-site tests to
AAMA 501.2
Products and appliances connected to the water supply - Physical evaluation
Water service products - Connectors, filters, fittings, hoses and pipes;
Back siphonage; Leakage; Pressure; Pressure cycling resistance; Pull-out resistance; Reversion; Thermal cycling; Thread form evaluation; Torque;
Not applicable;
AS 1722.2, ISO 7.1
Field testing of thread checks in accordance with ISO7.1 and ISO 228.1
AS/NZS 1260 Sections 3, 4, 5 
AS/NZS 1462 Parts 1, 6 
AS/NZS 1477 Clauses 3.3.1, 3.3.2, 3.3.3, 3.3.6, 3.4.1, 3.4.2, 3.4.3, 3.4.4, 3.5.1, 3.5.2 
AS/NZS 2492 Section 2.3, Table 2.1 
AS/NZS 4130 Sections 10.1, 10.2, 10.4 
including dimensional measurements for determination of compliance with Section 9.1 
AS/NZS 4441 Sections 11.1 
Hydrostatic pressure tests in the range 0.25 to 20,000 kPa 
Water flow pressure tests in the range 1 to 2,000 kPa 
Water flow rates in the range 0 to 400 L/s 
Static torque tests in the range 0 to 646 Nm 
Vacuum pressure tests in the range 0 to -100 kPa 
Force measurement tests in the range 0 to 10,000 N 
Linear dimensions 0.02 mm to 8 m 
Water temperature -100°C to 80°C

Endurance; Hydrostatic pressure;
Not applicable;
AS/NZS 4130 Section 10.1 , 10.4 and AS/NZS 4129
Thermal performance evaluation of building and insulating products
Building envelopes;
Air permeability;
Fan pressurisation;
BS EN 13829, AS/NZS ISO 9972