Back to Search Results


Address Details:
Unit 1, 9 Bearing Road
SEVEN HILLS , NSW 2147
AUSTRALIA Map
www.ciscientific.com

Contact Details:
Mr Jurgen Cyrulla
+61(02) 98384488

Availability:
Services available to external clients

SCOPE OF ACCREDITATION   View and Print Scope of Accreditation Printable version

Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.



ISO/IEC 17025 (2017)
Calibration
SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
Dimensional metrology - Engineering equipment and precision instruments
Centrifuges;
Rotational speed;
Comparison with a reference standard by differential measurement;
In-house method CY 20821
CAPABILITY
With Calibration and measurement capability of -
1.2 rpm from 10 to 900 rpm
2 rpm above 900 to 5000 rpm
0.02% of reading or 3 rpm (whichever is greater) above 5000 to 99 900 rpm
Mass - Determination of mass and calibration of weighing devices
Mass standards;
Mass;
Gravimetric measurement against reference mass;
CAPABILITY
With Calibration and measurement capability of-
3 μg from 1mg to 20 mg
4 μg from above 20 mg up to 50 mg 
5 μg from above 50 mg up to 500 mg 
6 μg from above 500 mg up to 1 g
7 μg from above 1 g up to 2 g
10 μg from above 2 g up to 5 g
25 μg from above 5 g up to 10 g
30 μg above 10 g up to 20 g 
40 μg above 20 g up to 50 g 
60 μg from above 50 g up to 100 g 
0.11 mg from above 100 g up to 200 g 
0.3 mg from above 200 g up to 500 g 
0.6 mg from above 500 g up to 1 kg 
2.5 mg from above 1 kg up to 2 kg 
20 mg from above 2 kg up to 10 kg 
0.2 g from above 10 kg up to 20 kg 
20 g from above 20 kg up to 30 kg
Mass - Determination of mass and calibration of weighing devices
Laboratory weighing devices; Precision laboratory balances;
Mass;
Gravimetric measurement against reference mass;
including on site calibrations



CAPABILITY
Including on site calibrations
With Calibration and measurement capability of-
1 in 106 or 4 ug (whichever is greater)  up to 0.5 g
6 in 106 above 0.5 g up to 1 g
4 in 106 above 1 g up to 2 g
2 in 106 above 2g up to 5g
3 in 106 above 5 g up to 10 g
2 in 106 above 10 g up to 20 g
1 in 106 above 20 g up to 1 kg
4 in 106 above 1 kg up to 10 kg
1 in 105 above 10 kg up to 20 kg
Mass - Determination of mass and calibration of weighing devices
Industrial weighing devices;
Mass;
Gravimetric measurement against reference mass;
including on site calibrations



CAPABILITY
Including on site calibrations
With Calibration and measurement capability of-
1 in 10âμ or 1 mg (whichever is greater) up to 30 kg
Temperature metrology - Ancillary temperature measuring equipment
Multi-channel thermocouple data recorders; Process calibrators;
Volt to temperature conversion;
Direct measurement by electrical input;
CAPABILITY
With Calibration and measurement capability of-
0.2 °C from -100 °C to 500 °C
0.3 °C from 500 °C to 1100 °C
Temperature metrology - Temperature measuring equipment
Digital temperature measuring systems;
Temperature;
Measurement against reference standard;
CAPABILITY
With Calibration and measurement capability of-
0.4 °C from -80 °C to 250 °C
0.6 °C from 250 °C to 500 °C
2.5 °C from 500 °C to 1100 °C
Temperature metrology - Verification of controlled enclosures
Autoclaves and sterilising ovens; Baths; Freezers; Furnaces; Incubators; Ovens;
Gradient; Spatial uniformity;
Direct temperature measurement;
AS 2853
CAPABILITY
With Calibration and measurement capability of -
0.9 °C in the range from 0 °C to 250 °C for Ovens and Furnaces
2.6 °C in the range from 250 °C to 1100 °C for Ovens and Furnaces
0.9 °C in the range from -40 °C to 100 °C for Incubators
0.8 °C in the range from 100 °C to 130 °C for Autoclaves and sterilising ovens
1 °C in the range from 131 °C to 160 °C for Autoclaves and sterilising ovens
1 °C in the range from -80 °C to -16 °C for Industrial freezers
0.9 °C in the range from -15 °C to ambient for Industrial freezers
0.8 °C in the range from 0 °C to 130 °C for Baths
Torque - Torque measuring and testing equipment
Torque wrenches;
Torque;
Comparison with a reference standard;
ISO 6789.2 and in house method 5.23
CAPABILITY
With Calibration and Measurement Capability of -
1.2% from 1.25 Nm to 1500 Nm
Volume and density - Determination of density
Alcohol meters; Apparent density (draft survey) hydrometers; Bark hydrometer; Baume hydrometer; Brix hydrometers; Density hydrometers; Soil (colloidal solution) hydrometers; Specific gravity hydrometers;
Baume; Brix; g/L; Percentage (%) alcohol by volume; Specific gravity;
Gravimetric method;
CAPABILITY
With Calibration and measurement capability of -
1/3 of the smallest scale division in the range 0 to 2.0 g/ml for Density Hydrometers;
1/3 of the smallest scale division in the range 0.990 to 1.040 kg/L for Apparent Density Hydrometers;
1/3 of the smallest scale division in the range -5 to +60 g/l for Soil Hydrometers;
1/3 of the smallest scale division in the range 0 to 90° Bx for Brix Hydrometers;
1/3 of the smallest scale division in the range 0 to 80° Bk for Bark Hydrometers;
1/3 of the smallest scale division in the range 0 to 90° Be for Baume Hydrometers;
1/3 of the smallest scale division in the range 0.6 to 2.0 for Specific Gravity Hydrometers;
1/3 of the smallest scale division in the range 0 to 100% for Alcohol Hydrometers