Back to Search Results


Address Details:
Unit 3/35 Bernoulli Street
DARRA, QLD 4076
AUSTRALIA Map

Contact Details:
Mr Vince Paessler
+61(07) 33753262

Availability:
Services available to external clients

SCOPE OF ACCREDITATION   View and Print Scope of Accreditation Printable version

Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.



ISO/IEC 17025 (2017)
Manufactured Goods
SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
Evaluation of access protection products
Access covers; Grates; Inspection covers;
Load;
Not applicable;
AS 3996 Appendix C
Material performance evaluation of metal products
Reinforcing bar and steel prestressing materials for concrete;
Bending properties; Proof load; Shear strength;
Not applicable;
AS/NZS 4671, 
ISO 15630.1

Tubing/piping;
Bending properties; Flattening properties;
Not applicable;
AS 2505.1, 
ASTM A370 clause A2.5

Threaded fasteners, bolts and nuts;
Compression; Proof load; Tension;
Not applicable;
AS 4291.1,
AS 4291.2,
ISO 898.1,
ISO 898.2,
ASTM E9-89a
0.4 to 1000 kN

Welded test specimens;
Nick-break fracture;
Macroscopic examination; Visual examination;
ANSI AWS D1.1,
ANSI AWS D1.2,
AS/NZS 2205.4.1,
ASME IX,
BS EN 287-1,
EN ISO 9017,
ISO 9017


Fillet-break fracture;
Macroscopic examination; Visual examination;
ANSI AWS D1.1,
ANSI AWS D1.2,
AS/NZS 2205.4.1,
ASME IX,
BS EN 287-1,
EN ISO 9017,
ISO 9017


Macroscopic examination;
Macroscopic examination;
ANSI AWS D1.1,
ANSI DWS D1.2,
AS 2205.5.1,
ASME IX,
ASTM E340,
BS EN 287-1,
BS EN 1321,
BS EN ISO 5817,
ISO 5817

Prepared metallic test specimens; Welded test specimens;
Hardness;
Brinell;
AS 1816.1,
ASTM E10,
ISO 6506-1
2.45 to 29.4 kN 



Hardness;
Vickers;
AS 1817.1,
AS 2205.6.1,
AS 4291.1,
AS/NZS 4291.2,
ASTM E92,
BS EN 1043-1,
BS EN 288-3,
BS EN 9015.1,
ISO 898.1,
ISO 898.2,
ISO 6507-1
0.49 to 294 N


Impact resistance;
Charpy - Assessment of fracture appearance; Charpy - Lateral expansion; Charpy V-notch - Impact value;
AS 1544.2,
AS 1544.5,
AS 2205.7.1,
ASTM E23,
BS EN 288-3,
BS EN 875,
BS EN 9016,
BS EN 10045-1,
ISO 148-1
at ambient temperature down to -160°C and at -196°C



Bending properties;
Longitudinal guided bend;
ANSI AWS D1.1,
ANSI AWS D1.2,
AS 2505.1,
AS 2205.3.1,
ASME IX,
ASTM E190,
ASTM E290,
ASTM E381


Tensile properties;
All-weld-metal tensile; Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; Uniaxial tension;
ANSI AWS D1.1,
ANSI AWS D1.2,
AS 1391,
AS 2205.2.1,
AS 2205.2.2,
ASME IX,
ASTM A370,
ASTM E8M,
BS EN 288-3,
BS EN 895,
BS EN 4136,
BS EN 10002-1,
BS EN 15614.1,
ISO 6892.1,
0.4 to 1000 kN