Back to Search Results


Address Details:
39 Success Way
HENDERSON, WA 6166
AUSTRALIA Map
www.apts.com.au

Contact Details:
Mr Matthew Ricciardo
+61(08) 94121500

Availability:
Services available to external clients

SCOPE OF ACCREDITATION   View and Print Scope of Accreditation Printable version

Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.



ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity
SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
Evaluation of mechanical performance of pressure plant, pipelines and equipment
High pressure oil and gas pipelines; Low pressure oil and gas pipelines;
Strength, leak and combined pressure evaluation;
Not applicable;
AS 2885.5 Section 6; AS/NZS 4645.2 section 6;; AS/NZS 5601.1 Appendix E; ASME B31.8 Section 841.3 and Appendix N; API RP 1110; DNVGL-ST-F101 Sections 8.7 and 10.10.3; ISO 14692-4 Section 4.6.2; ASME B 31.4 Section 437.4
Up to 260 MPa.

Pressure vessels;
Hydrostatic pressure;
Not applicable;
AS/NZS 1200 Appendix J4.2.3 and J7.5; AS 1210 Section 5.10, AS 1692 Section 2.8.2; AS 4037 Section 17, AS 4041 Sections 6.6 and 6.7, API 620 Sections 7.18 and 7.19; API 650 Sections 7.3.6 and 7.3.7; in-house method TM-05
Up to 413 MPa including on-site testing.


Burst pressure; Pneumatic pressure;
Not applicable;
API 620 Section 9; API 650 Sections 7.3.5 and 7.3.8; AS/NZS 1200 Appendix J4.2.3; AS 1210 Section 5.11; AS 1692 Section 2.8.3; AS 3791; AS 4037 Section 18;; in-house method TM-04
Up to 100 MPa including on-site testing.

Low pressure oil and gas pipelines; Sewer pipelines; Water pipelines;
Strength, leak and combined pressure evaluation;
Not applicable;
APGA Code of Practice Section 8; AS/NZS 2033 sections 7.2, 7.3 and 7.3.3; AS/NZS 2566.2 Sections 6.3.4, 6.4.2, 6.4.4, Appendix M and Appendix N (excluding N5), AS/NZS 4645.3 Section 6;
Up to 70 MPa.

Hose and hose assemblies; Piping; Pressure fittings; Valves;
Burst pressure; Pneumatic pressure;
Not applicable;
API 526 Section 9, API 527 Section 2, AS 1180.5 (1999) Sections 7.1 and 7.3, AS 1271 section 3.4, AS 3791, AS 4037 Sections 18 and 19.1, AS 4041 Sections 6.6, 6.8.1 and 6.9, ASME B31.3 section 345, AS/NZS 1200 Appendix J4.2.3, AS/NZS 3788 Appendix D16, AS/NZS 5601.1 Appendix E, in-house method TM-01,TM-04 and TM-18,  ISO 1402 Sections 8.1, 8.3 and 8.4
Up to 100 MPa including on-site testing.


Burst pressure; Hydrostatic pressure;
Not applicable;
API 526 Section 9; API 527 Section 4; AS 1180.5 Sections 7.1 and 7.3; AS/NZS 1200 Appendices J4.2.3 and J7.5; AS 1271 Sections 2.6 and 3.4; AS/NZS 1477 Section 3.3.6; AS/NZS 1462.8 Section 7.1.3; AS 1851 Table 8.4 item 1.4; AS 2117 Section 2.2; AS/NZS 2033 sections 7.2 and 7.3 (visual leak inspection only); AS/NZS 2280 Section 4 and Appendix F; AS 2419.2; AS/NZS 2885.5 Section 7 (Strength and Type A Leak Test- visual test); AS 3500.1 Section 18.3.1; AS/NZS 3723; AS/NZS 3788 Appendix D15; AS 3791 Methods 5A, 5B and 5D; AS 4037 Section 17; AS 4041 Sections 6.6 and 6.7; AS/NZS 4058; AS 4233.1 Appendix E; AS 4795.2 Sections 5.2.1, 5.2.2, 5.2.3, 5.2.6, 5.3.2, 5.3.3, 5.3.4, 5.3.5 and 5.3.6; ASME B31.3 Section 345; DNVGL-ST-F101 Section 8.7 (visual test); ISO 1402 Sections 8.1, 8.3 and 8.4 ; ISO 14692-4 Section 4.6.2 (visual test); in-house method TM-01 and TM-03;  AS/NZS 2566.2 Section 6.3.4.5 and Appendix M8 (visual leak inspection); ASME B31.4 Section 437.4 (visual test)
Up to 413 MPa including on-site testing.