Back to Search Results


Address Details:
36 Bradfield Road
LINDFIELD WEST, NSW 2070
AUSTRALIA Map

Contact Details:
Ms Charmaine Kwan
+61(02) 84673836

Availability:
Services conditionally available to external clients

SCOPE OF ACCREDITATION   View and Print Scope of Accreditation Printable version

Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.



ISO/IEC 17025 (2017)
Calibration
SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
Flow metrology - Flow measuring devices and systems
Gas meters; Orifice meters; Sonic nozzles;
Flow rate; Volume (and nominal flow rate);
Direct comparison against a reference standard;
In-house Test Method EAFA 8.2.25 and EAFA 8.2.27
CAPABILITY
Calibration of gas flow meters for Mass Flow Rate, Volume flow rate and Volume
using Mercury Sealed Piston Prover;
including
Rotary Meters;
Turbine Meters;
Heat Element Meters (Thermal Flowmeter and Mass Flow Controllers);
Variable Area  Flowmeter/Rotameters;
Soap Film Meters;
Wet Gas Meters;
Differential Pressure Flowmeters (Orifice Plate/Nozzle and Laminar Flow Element);
Ultrasonic Meters;
Domestic Gas Meters;
Piston Prover Meters;
Critical Flow Venturi Nozzles (Sonic Nozzles)

With Calibration and Measurement Capability of -
0.1% of  flowrate normalised to 101.325kPa and 20°C
from 0.060x10-3 Nm³/h to 2 Nm³/h  
using air, nitrogen, argon, carbon dioxide, helium or oxygen
at pressures up to 700 kPa (flowrate normalised to 101.325kPa and 20°C)



Flow rate; Volume (and nominal flow rate);
Direct measurement by critical flow venturi nozzle
;
In-house Test Method EAFA 8.2.26
CAPABILITY
Calibration of gas flow meters for Mass flow rate, Volume flow rate and Volume
using Sonic Nozzle Arrays;
and including
Rotary Meters;
Turbine Meters;
Heat Element Meters (Thermal Flowmeter and Mass Flow Controllers);
Variable Area  Flowmeter/Rotameters;
Soap Film Meters;
Wet Gas Meters;
Differential Pressure Flowmeters (Orifice Plate/Nozzle and Laminar Flow Element);
Ultrasonic Meters;
Domestic Gas Meters;
Piston Prover Meters;
Critical Flow Venturi Nozzle (Sonic Nozzles)
 
With Calibration and Measurement Capability of -
0.13% of flowrate normalised to 101.325kPa and 20°C
from 0.005 Nm³/h to 60 Nm³/h
using air, nitrogen, argon, carbon dioxide, helium or oxygen
at pressures up to 700 kPa (flowrate normalised to 101.325kPa and 20°C)

0.13% of flowrate normalised to 101.325kPa and 20°C
from 60 Nm³/h to 480 Nm³/h
using air
at pressures up to 700 kPa (flowrate normalised to 101.325kPa and 20°C)

0.17% of flowrate normalised to 101.325kPa and 20°C
from 480 Nm³/h to 7000 Nm³/h
using air at atmospheric pressures (flowrate normalised to 101.325kPa and 20°C)


Flow rate; Volume (and nominal flow rate);
Direct comparison against a reference standard;
In-house Test Methods EAFA 8.2.25 and EAFA 8.2.27
CAPABILITY
Calibration of gas flow meters for Mass Flow Rate, Volume flow rate and Volume
using Bell Prover;
including
Rotary Meters;
Turbine Meters;
Heat Element Meters (Thermal Flowmeter and Mass Flow Controllers);
Variable Area  Flowmeter/Rotameters;
Soap Film Meters;
Wet Gas Meters;
Differential Pressure Flowmeters (Orifice Plate/Nozzle and Laminar Flow Element);
Ultrasonic Meters;
Domestic Gas Meters;
Piston Prover Meters;
Critical Flow Venturi Nozzles (Sonic Nozzles)

With Calibration and Measurement Capability of -
0.1% of  flowrate normalised to 101.325kPa and 20°C
from 1.5 Nm³/h to 25 Nm³/h  
using air, nitrogen, argon, carbon dioxide, helium or oxygen
at pressures up to 700 kPa




Liquid meters;
Flow rate;
Gravimetric method;
From 5 to 30 kg/min using fluids from 700 to 1000 kg/m3

CAPABILITY
Calibrations at Londonderry Flow Facility
With Calibration and Measurement Capability of -
Calibrations at Londonderry Flow Facility
0.042% of flow rate from 5 to 30 kg/min using fluids from 700 to 1000 kg/m3
With a minimum batch size of 30 kg


Flow rate;
Direct comparison against a reference standard; Volumetric transfer;
From 4 L/min to 1700 L/min (Propane and Butane)
From 5 L/min to 4100 L/min in synthetic Petrol and Diesel fluids
CAPABILITY
Calibrations at Londonderry Flow Facility
By comparison with a volumetric piston prover;
With Calibration and Measurement Capability of -
0.08% of flow rate from 4 L/min to 1700 L/min (Propane and Butane)
0.031% of flow rate from 5 L/min to 4100 L/min in synthetic Petrol and Diesel fluids
With a minimum of 5 passes of the piston prover


Flow rate;
Comparison with a reference meter; Volumetric transfer;
From 4 L/min to 1600 L/min (Propane and Butane)
From 5 L/min to 4100 L/min in synthetic Petrol and Diesel fluids
CAPABILITY
Calibrations at Londonderry Flow Facility
With Calibration and Measurement Capability of-
0.12% of flow rate from 4 L/min to 1600 L/min (Propane and Butane)
0.05% of flow rate from 5 L/min to 4100 L/min in synthetic Petrol and Diesel fluids

High pressure gas meters;
Flow rate;
Comparison with a reference meter; Gravimetric method; Volumetric transfer;
CAPABILITY
Calibration of high pressure gas flow meters at the Londonderry Flow Facility;
With Calibration and Measurement Capability of -
0.10% of flow rate from 1 kg/min to 100 kg/min and from 10 000 kPa to 30 000 kPa (100 bar to 300 bar)
Force metrology - Force measuring and testing equipment
Elastic force measuring devices; Force gauges; Load cells;
Force in compression; Force in tension;
Comparison measurement with reference load cell;
From 50 N to 550 kN (tension and compression)
From 0.5 MN to 4.5 MN (compression)
CAPABILITY
With Calibration and Measurement Capability of -
2 in 10âμ in the range 50 N to 550 kN (tension and compression);
 2 in 104 in the range 0.5 to 1.5 MN (compression);
 4 in 104 in the range 1.5 to 4.5 MN (compression);
Mass - Determination of mass and calibration of weighing devices
Industrial mass standards; Mass standards;
Mass;
Gravimetric measurement against reference mass;
Calibration of stainless steel mass standards 
From 0.5 mg to 20 kg

Industrial Mass Standards
From 100 g to 6000 kg
CAPABILITY
With Calibration and Measurement Capability of -
Mass Standards
0.6 μg at 0.5 mg;
 0.5 μg at 1 and 2 mg;
 0.6 μg at 5 mg;
 0.5 μg at 10 and 20 mg;
 0.6 μg at 50 mg;
 0.8 μg at 100 mg;
 1 μg at 200 mg;
 1.3 μg at 500 mg;
 1.5 μg at 1 g;
 2.4 μg at 2 g;
 3.4 μg at 5 g;
 4.4 μg at 10 g;
 7 μg at 20 g;
 9 μg at 50 g;
 13 μg at 100 g;
 19 μg at 200 g;
 35 μg at 500 g;
 30 μg at 1 kg;
 0.22 mg at 2 kg;
 0.31 mg at 5 kg;
 0.51 mg at 10 kg;
 1.0 mg at 20 kg

Industrial Mass Standards
1 in 105 from 100 g up to 1500 kg
2 in 105 above 1500 kg to 6000 kg
Volume and density - Determination of density
LPG hydrometers; LPG specific gravity hydrometers;
kg/m3; Specific gravity;

LPG density hydrometers
From 480 kg/m³ to 650 kg/m³ between 15 ºC and 30 ºC
From 450 kg/m³ to 560 kg/m³ between 30 ºC and 40 ºC
 
LPG specific gravity hydrometers
From 0.48 to 0.65 between 15 ºC and 30 ºC
From 0.45 to 0.56 between 30 ºC and 40 ºC
  
CAPABILITY
With Calibration and Measurement Capability of -
LPG density hydrometers
 0.3 kg/m³ from 480 kg/m³ to 650 kg/m³ between 15 ºC and 30 ºC
 0.45 kg/m³ from 450 kg/m³ to 560 kg/m³ between 30 ºC and 40 ºC
 
 LPG specific gravity hydrometers
 0.0003 from 0.48 to 0.65 between 15 ºC and 30 ºC  
0.00045 from 0.45 to 0.56 between 30 ºC and 40 ºC

Density of solids;
kg/m3;
To be determined;
up to 200 g
 From 500 kg/m³ to 25 000 kg/m³ between 15 ºC and 25 ºC
CAPABILITY
With Calibration and Measurement Capability of -
5 in 10âμ 

Density of liquids;
g/cm3;
To be determined;
From 0.5 to 2 g/cm³ between 5 ºC and 40 ºC
CAPABILITY
With Calibration and Measurement Capability of -
5 in 10âμ from 0.5 to 2 g/cm³ between 5 ºC and 40 ºC

Alcohol meters; Baume hydrometer; Brix hydrometers;
Baume; Brix; Percentage (%) alcohol by volume;
To be determined;
Alcoholmeters
From 0 % to 100% alcohol by volume between 15 ºC and 25 ºC
 Brix hydrometers
 From 0 °Brix to 90 °Brix between 15 ºC and 25 ºC
Baume hydrometers
From -2 °Baume  to 80 °Baume between 15 ºC and 25 ºC
 
CAPABILITY
With Calibration and Measurement Capability of -
Alcoholmeters
0.2 of smallest scale division
Brix hydrometers
0.2 of smallest scale division
Baume hydrometers
0.2 of smallest scale division

Milk hydrometers;
kg/m3;
To be determined;
From 1015 kg/m³ to 1050 kg/m³ between 15 ºC and 25 ºC
CAPABILITY
With Calibration and Measurement Capability of -
2 in 10âμ from 1015 kg/m³ to 1050 kg/m³ between 15 ºC and 25 ºC

Apparent density (draft survey) hydrometers; Density hydrometers; Soil (colloidal solution) hydrometers; Specific gravity hydrometers;
g/L; kg/m3; Specific gravity;
To be determined;
Density hydrometers
 From 500 kg/m³ to 2000 kg/m³ between 15 ºC and 25 ºC
Specific gravity hydrometers
From 0.5 to 2.0 between 15 ºC and 25 ºC
Apparent density (draft survey) hydrometers
From 0.990 kg/L to 1.040 kg/L between 15 ºC and 25 ºC
Soil (colloidal solutions) hydrometers
From -2 g/L to 60 g/L between 15 ºC and 25 ºC
CAPABILITY
With Calibration and Measurement Capability of -
Density hydrometers
2 in 10âμ
Specific gravity hydrometers
2 in 10âμ
Apparent density (draft survey) hydrometers
0.2 of smallest scale division
Soil (colloidal solutions) hydrometers
 0.2 of smallest scale division
Volume and density - Industrial volumetric equipment and bulk storage
Industrial volumetric proving measurements; Standard measures - > 25 L;
Volume;
Gravimetric method;
From 1 L to 6000 L
CAPABILITY
With Calibration and Measurement Capability of -
0.01% from 1 L to 6000 L