Back to Search Results

National Measurement Institute (NMI)

TRADE MEASUREMENT LABORATORY, BRISBANE
| ACCREDITATION NUMBER: 1 | SITE NUMBER: 13207 |

Address Details:
33 Kingtel Place
Geebung, QLD 4034
AUSTRALIA Map
www.measurement.gov.au
Contact Details:
Mr Greg Buckley
+61(07) 36136108

Availability:
Services conditionally available to external clients
SCOPE OF ACCREDITATION   View and Print Scope of Accreditation Printable version

Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

  • ISO/IEC 17025 (2005) - The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
    Calibration
    • SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
    Dimensional metrology - Engineering equipment and precision instruments
    		Steel rulers and measuring tapes;
    		Length measurements;
    		Direct measurement against a reference standard;
    		BS 4372 from 1 mm up to 3 m
    CAPABILITY
    With Calibration and Measurement Capability of-
    0.015 mm from 1 mm up to 1 m;
    2 in 105 or 0.05 mm (whichever is greater) above 1 m up to 3 m
    Dimensional metrology - Length and angle standards
    		Precision graticules;
    		Length measurements;
    		Comparison with a reference standard;
    		from 0.1 mm up to 20 mm
    CAPABILITY
    Glass scales up to 20 mm
    With Calibration and Measurement Capability of-
    4 μm from 0.1 mm up to 20 mm

    		Area standards;
    		Length measurements;
    		Comparison with a reference standard;
    		 up to 5 m2
    CAPABILITY
    Standards of area for leather area measuring equipment
    With Calibration and Measurement Capability of-
    0.1% or 5 mm2 (whichever is greater) up to 5 m2
    Mass - Determination of mass and calibration of weighing devices
    		Gaming accessories;
    		Mass;
    		Gravimetric measurement against reference mass;
    		from 1 mg up to 5 000 kg
    CAPABILITY
    2 in 105

    		Mass standards;
    		Mass;
    		Gravimetric measurement against reference mass;
    		from 1 mg up to 1000 kg
    CAPABILITY
    3 μg from 1 mg up to 10 mg;
    5 μg above 10 mg up to 200 mg;
    2 in 106 or 10 μg (whichever is greater) above 200 mg up to 20 g;
    1 in 106 above 20 g up to 25 kg;
    5 in 106 above 25 kg up to 1000 kg

    		Industrial mass standards;
    		Mass;
    		Gravimetric measurement against reference mass;
    		from 1 mg up to 5000 kg
    CAPABILITY
    1 in 105 or 100 μg (whichever is greater) from 1 mg up to 5000 kg
    on-site calibrations with least uncertainties of measurement of -
    3 in 105 from 100 g up to 2 kg
    5 in 106 from 5 kg up to 10 kg
    1.5 in 105 from above 10 kg up to 50 kg
    5 in 105 from 500 kg up to 5 000 kg
    Volume and density - Industrial volumetric equipment and bulk storage
    		Industrial volumetric proving measurements;
    		Volume;
    		Gravimetric method;
    		from 1 l up to 5000 l
    CAPABILITY
    0.01% from 1 l up to 5000 l
    On-site calibration of proving tanks by standard measures or by gravimetric
    methods with least uncertainties of measurement of -
    0.02% from 5 l up to 20 l
    0.015% from above 20 l up to 5 000 l

    		Standard measures (> 25 L);
    		Volume;
    		Gravimetric method;
    		from 10 ml up to 1000 l
    CAPABILITY
    0.007%
    Volume and density - Laboratory volumetric glassware and measures
    		Volumetric glassware and measures;
    		Volume;
    		Gravimetric method;
    		AS 2162
    		 up to 2 l
    CAPABILITY
    2 in 103 or 0.001 ml (whichever is greater) at 1 ml;
    1 in 104 or 0.004 ml (whichever is greater) above 1 ml up to 2 l

    		Standard measures (< 50 L);
    		Volume;
    		Gravimetric method;
    		from 1 ml up to 10 l
    CAPABILITY
    0.1% or 0.1 ml (whichever is greater) from 1 ml up to 10 l